daz_g Posted November 4, 2004 Share Posted November 4, 2004 I've fitted fuel and brake pipes down the tunnel and i've used 8mm copper microbore pipe (from plumbers merchants) for the fuel lines because it bends easily and I've used 5mm copper brake pipes (from local motor shop) but there are no markings on either of them. But now i'm wondering whether this will be SVA acceptable. Is it ok to use copper pipes ? Do i need to take them out and replace them with something BS marked ? If so what ? Quote Link to comment Share on other sites More sharing options...
Steve and Becky Posted November 4, 2004 Share Posted November 4, 2004 I would think the brake pipe will be ok, but the Fuel line sounds a bit dodgy.... Im sure someone will know for sure tho... Quote Link to comment Share on other sites More sharing options...
Nick A Posted November 4, 2004 Share Posted November 4, 2004 Metal brake pipes are not normally marked I thought it was just the rubber fuel hose that needed to be marked-may be wrong though Quote Link to comment Share on other sites More sharing options...
james grayley Posted November 4, 2004 Share Posted November 4, 2004 used 10mm copper pipe for my flow and return fuel lines no problems. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.