Popular Post Rednop1 Posted Tuesday at 15:22 Popular Post Posted Tuesday at 15:22 As the oven is now fixed at massive expense.. I will start taking orders again from monday 30th march I will also be working things slighty different as Im going to make items in batches of five to help limit materials waste and i will also be work items together that complement each other to help maximise oven space and it will also help with things like cardboard supplys and should help with saving time . And I will be starting with dash blanks and front splitters Stay lucky 10 1 Quote
DannyTGS Posted Tuesday at 20:42 Posted Tuesday at 20:42 How much are your front splitters? Do they fit the FW nose cone? Quote
Naranja_Al Posted Tuesday at 21:32 Posted Tuesday at 21:32 45 minutes ago, DannyTGS said: FW nose cone That’s not an FW bonnet, it’s a ducted ZK nose & Ash’s splitter will fit perfectly Quote
DannyTGS Posted Tuesday at 21:52 Posted Tuesday at 21:52 19 minutes ago, Naranja_Al said: That’s not an FW bonnet, it’s a ducted ZK nose & Ash’s splitter will fit perfectly wait my nose is a ZK? Quote
Naranja_Al Posted Tuesday at 21:57 Posted Tuesday at 21:57 4 minutes ago, DannyTGS said: nose is a ZK? Yep, with a V8 bonnet. 1 Quote
DannyTGS Posted Tuesday at 23:21 Posted Tuesday at 23:21 Well that’s good to know, so it’s only really the rear body that’s FW then Quote
Naranja_Al Posted yesterday at 06:18 Posted yesterday at 06:18 No, there is an FW bonnet which hinges at the front. Quote
Dave Eastwood (Gadgetman) Posted 23 hours ago Posted 23 hours ago 9 hours ago, DannyTGS said: Well that’s good to know, so it’s only really the rear body that’s FW then Yes, on your car, it’s an FW tub, with ZK V8 bonnet and ZK V8 Ducted nose cone. (Technically it’s also a ZK scuttle, but there is only one scuttle for FW and ZK use, so it’s always the same. As Naranja said, the FW bonnet is a one piece affair, with built in nose cone. It also attaches via a hinge at the front and swings up for access, because of this, the underside of the nose is a slightly different shape to give more clearance with the ground when it swings up. That alone would make the splitter a trickier job to fit, if it would at all. And of course with the splitter on, the bonnet would need to be made removable (or hinged in some different much more complicated way) as the splitter would stop you being able to open it on the standard hinge. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.