tex Posted 6 hours ago Posted 6 hours ago Similar to this or narrower. I need to expel hot air under V8 style engine cover a bit better. Suffered heat soak last summer after lonnnng hot days driving hard then hitting crawling traffic.. So removing said trapped air will help
DeanMegaS2000 Posted 2 hours ago Posted 2 hours ago Could try in the 3D printing section. Good little project for someone. I'm new to it so don't have the skill to draw honey comb yet.
GarethS09 Posted 2 hours ago Posted 2 hours ago 24 minutes ago, DeanMegaS2000 said: Could try in the 3D printing section. Good little project for someone. I'm new to it so don't have the skill to draw honey comb yet. Still a work in progress on mine but if you check the downloads section there are 3D models already available. https://forum.wscc.co.uk/forum/files/category/112-the-mofast-files-an-archive/ I wanted mine to fit from above rather than underneath like the existing available models. For honey comb I used a free model online and just trimmed it down to fit the vent. 1
DeanMegaS2000 Posted 1 hour ago Posted 1 hour ago 30 minutes ago, GarethS09 said: Still a work in progress on mine but if you check the downloads section there are 3D models already available. https://forum.wscc.co.uk/forum/files/category/112-the-mofast-files-an-archive/ I wanted mine to fit from above rather than underneath like the existing available models. For honey comb I used a free model online and just trimmed it down to fit the vent. What a great idea cropping another model. I'll have to try that.
Recommended Posts