Compomotive CXR Alloy Wheels with Avon Slick tyres

[R_P_M_]

A set of 8x13 rear and 7x13 front Compomotive CXR Alloy Wheels with Avon Slick tyres from a Westfield SE sprint car I have sold. These wheels are in good condition, the odd mark and residue from gaffa tap over the wheel weights. No repairs, welds or dents.

4x108 pcd
Front offset et20, rear offset et18

£380ono

 

Collect from Manchester. I travel a lot so try me as logistics might workout.

[DeanMegaS2000]

Do you know if these would fit my mega S2000? 

 

I'm interested in them if they will. Only thing I'm in warkworth, Northumberland. Would you be passing or interested in posting? Of course i'll cover postage 

[DeanMegaS2000]

@Dave Eastwood (Gadgetman)would you happen to know if these wheel offsets would fit a mega S. I think i've read you've swapped 15 & 13 wheels on yours. 

 

[R_P_M_]

1 hour ago, DeanMegaS2000 said:

Do you know if these would fit my mega S2000? 

 

I'm interested in them if they will. Only thing I'm in warkworth, Northumberland. Would you be passing or interested in posting? Of course i'll cover postage 

Hi, I don't know I'm afraid. I can look to ship them, from memory Paisley Freight have a wheels shipping service 

[LoneWolf]

1 hour ago, DeanMegaS2000 said:

@Dave Eastwood (Gadgetman)would you happen to know if these wheel offsets would fit a mega S. I think i've read you've swapped 15 & 13 wheels on yours. 

 

They may stick out a bit more than what you have at the moment, standard Westfield wheels usually have ET25-35. Ideally you want to see what offset your current wheels have, then use an online service like www.willtheyfit.com to check the position of the new wheels.

[DeanMegaS2000]

I'm in the Gulf of Mexico at the moment. Due home Thursday, I could check then. I do have 10mm spacers on my current ones. 

15" team dynamics 1.2s 

[Naranja_Al]

Sure the fronts will be fine.

 

In my experience (ET20 8J) rear wheels, a spacer will be required so the inside face of the wheel clears the upright. I run a 10mm spacer so the equivalent of ET10.

 

I think @Rob Hunter - Club Secretary  runs ET24 8J rear wheels with a 15mm Spacer so the equivalent ET9.

[Naranja_Al]

17 minutes ago, Naranja_Al said:

Sure the fronts will be fine.

 

In my experience (ET20 8J) rear wheels, a spacer will be required so the inside face of the wheel clears the upright. I run a 10mm spacer so the equivalent of ET10.

 

I think @Rob Hunter - Club Secretary  runs ET24 8J rear wheels with a 15mm Spacer so the equivalent ET9.

Obviously tyre choice can play a factor here too.

[DeanMegaS2000]

I currently have 10mm spacers on the rear, to get my current wheels to fill the arch better. So this is positive stuff