eggontoast Posted 51 minutes ago Posted 51 minutes ago Hello all, Are wheel ramps useful for a Westfield? Is it possible to reverse a FW bodied car on to some without scuffing the nose on the ground, but fore then jacking the front? I'm confident jacking and supporting the front of the car but not so much the back. This sort of thing (these specifically give 20cm lift): Quote
jeff oakley Posted 46 minutes ago Posted 46 minutes ago All depends upon what you are wanting to do. They are a good safe way of raising a car and then being underneath secure, but most maintenance you do involves taking off wheels so these do not really help in that situation. I prefer a good quality jack and stands, not cheap import tools Quote
dvd8n Posted 46 minutes ago Posted 46 minutes ago I don't know about FW but I use ramps with my ZK all the time, front and back. Quote
Ian Kinder (Bagpuss) - Joint Peak District AO Posted 42 minutes ago Posted 42 minutes ago I use them, but don’t drive onto them . I prefer to jack up and put them under the raised wheels. Quote
dvd8n Posted 38 minutes ago Posted 38 minutes ago 2 minutes ago, Ian Kinder (Bagpuss) - Joint Peak District AO said: I use them, but don’t drive onto them . I prefer to jack up and put them under the raised wheels. I've never done that. I've always driven onto mine. Maybe it depends how low you are. Quote
Flying Carrot Steve Posted 36 minutes ago Posted 36 minutes ago You can get them with built-in jacks too (usually a bottle jack type affair) and raise the car quite a bit higher than the standard ones. Not sure how safe they are though but I'd imagine as safe as any bottle jack is. Quote
mega ade Posted 23 minutes ago Posted 23 minutes ago I personally wouldn't use them I've seen a few disasters with people trying to use ramps over the years can't beat a low nose trolly jack and good quality stands your westfield deserves it. Quote
eggontoast Posted 22 minutes ago Author Posted 22 minutes ago Thanks for the thoughts all. I've a low profile jack already and some totally adequate stands. Maybe I should just play with the rear placement a bit. Quote
Stuart Posted 20 minutes ago Posted 20 minutes ago I have some with a built in bottle jack and they are fantastic. Drive onto them almost flat then jack them up. Locking mechanism when jacked + use axle stands too Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.