Stopping the rain coming in

[Rexer200]

I’ve been caught in the rain a couple of times and found on the motorway especially water can come through the air vents just at the bottom of the screen and also I get a steady trickle of water on my left leg.

 

Can someone point me to photos or a guide of where I need to seal up to stop this happening? I prefer not to take too much of the car apart to do it. I’ve heard people talk about scuttle sealing but which parts of the scuttle need to be sealed.

 

[corsechris]

Other than 'they all do that, sir"...

 

FWIW, on ours, the scuttle is sealed to the tub along the entire perimeter where it sits on the car, the screen is sealed to the top of the scuttle, the pillars are sealed to the screen frame.

 

Been a long time (years) since we drove ours in the rain or with the hood on, but another popular place for water to get in is the side screens. Front edge where they meet the pillars and depending on how well or otherwise they fit, along the bottom edge too.

[Paul Hurdsfield - Joint Manchester AO]

Also when the spray hits the rear wheel arch it bounces up under the sidescreen onto your upper right arm, there’s not a lot you can do to stop that, and believe me I’ve tried 🙄

on a zetec car it’s not as much of a problem for the passenger cos the exhaust deflects a lot of the spray away.

i suppose it’s the same for the driver on a Duratec car.

[corsechris]

….which reminds me, I added some DIY Kaylan mudflaps to the cyclewings which made a big difference to the amount of crud that gets thrown up. 

[Rexer200]

Mines is F20C so exhaust is drivers side so not so much of an issue.

i guess I’ll have to take a look for gaps and seal accordingly. Any recommendations on what sealer to use?