Willwood Big brake kit.

[Steve Bosworth]

 

Willwood big disc brake kit, Alloy hubs with new bearings and long studs . Only dry assembled 

 

Caliper Type: Dynalite 4 Pot

Mount Type: Lug

Disc Size (Diam x Width): 285 x 21

Possible Wheelsize (Inches): 15

Spare Disc Part No.: BD13/285

 

Kit Contents:-

2 x Wilwood Dynalite 4 Pot Calipers

2 x 285mm x 21mm Vented Discs

2 x Caliper Mounting Brackets

1 x Set of new Mintex pads

1 x Hardware Kit (bolts, washers, nuts, caliper adaptors) 

 

2x New Alloys hubs with Bearings

 

Whole lot £550 collected

[fildyke]

Hi steve

 

Just checking but I assume these won't fit under a 13inch rim

 

Cheers

 

Phil

[Steve Bosworth]

Hi Phil, can’t see why not I was planning on putting them on mine with 13”I currently have the hispec big brake kit 285mm disks and my 13”s fit fine. You just have to make sure the wheel weights are in the inside of the wheel

[fildyke]

Ok thanks Steve

 

I currently have the Westfield hispec ultralites fitted. Do you know if these would be a direct replacement or would they need an adapter. 

[mTT97]

4 hours ago, fildyke said:

Hi steve

 

Just checking but I assume these won't fit under a 13inch rim

 

Cheers

 

Phil

i have these brakes on my car and 13" wheels (minispeed minilite) don't fit. Maybe it depends on wich type of 13" you're trying to fit.

[Naranja_Al]

These look now like Wilwood Powerlite calipers to me. If they are, they fit under 13” Team Dynamics 1.2 and Compomotive CXR wheels. I believe Minilites have thicker rims…..

 

 

[LoneWolf]

5 hours ago, Naranja_Al said:

These look now like Wilwood Powerlite calipers to me. If they are, they fit under 13” Team Dynamics 1.2 and Compomotive CXR wheels. I believe Minilites have thicker rims…..

 

 

The calipers look to be Midilites, which are what RallyDesign is offering with the 285mm disc. They market that as 15" only, but I agree with @mTT97 as clearance hugely depends on the wheels used. Split rims usually have much more space than one piece wheels.

[Dave Eastwood (Gadgetman) - Club Chairman]

Yep, when it comes to the mid size and bigger four pot calipers, it’s just impossible to talk in generalities when it comes to 13” wheels fitting or not. You have to be specific about which caliper/disc type you have - sometimes with the radial mount types, even the specific kit used. At the same time you also have to be specific about the precise alloy wheel make, model and size.

 

As has been said, many 13” options, I suspect probably more the budget to mid price types like many Minilite replicas, have rims that are just too thick for some of the four pot options. Where as the more premium types, like Images range, Compomotive CXR’s etc - all designed to be lighter weight, but strong, are that bit thinner with a bit more room for the calipers.

[fildyke]

Ok thanks everyone for the info. Until as always 

 

I have compomotive cxr wheels. 

[Naranja_Al]

6 minutes ago, fildyke said:

Ok thanks everyone for the info. Until as always 

 

I have compomotive cxr wheels. 

I have the same calipers (thanks @LoneWolf for correcting the spec) and Compomotive CXR wheels and they fit 👍

[Steve Bosworth]

I can confirm they are Midilites, and would fit under Team Dynamics 1.2 13"