Ortyn Posted yesterday at 22:18 Posted yesterday at 22:18 Just wondering this difficult to get a simple clutch release bearing for a Westfield. I thought the company still selling theese. They are not available on the site. May I am wrong the MT75 gearbox was the replacement for the type 9 but they only sell bearing for the type 9 what is much smaller. Do anyone sell one of theese? I want to reassemble my car but a simple part blocking me doing that.
Kit Car Electronics and Essex AO Posted 12 hours ago Posted 12 hours ago That seems to have an extension - discussion here about using a 19mm spacer versus moving the pivot pin to an extended one: https://www.locostbuilders.co.uk/viewthread.php?tid=219124 https://kitspares.co.uk/products/mt75-clutch-arm-pin
Ortyn Posted 37 minutes ago Author Posted 37 minutes ago Yes, Someone sent me the same info so may the longer pin could work. Today I took a closer look again and seperated the spacer from the bearing. Doing this just been using a flathead screwdriver and prying apart. It was quiet easy. Actually the spacer is a simple part, attached properly to the bearing. I ordered a replacement part from LUK and I will try the same thing with the brand new bearing (prying apart) and will reattach the spacer onto the new bearing. I am not sure if it will work but I will give it a try. Will upload the result. If it fails then I will order the new, longer pin. Many thanks for the links! 1
Recommended Posts