Naranja_Al Posted October 5 Posted October 5 Head was purchased new in 2019 and ported by AL Developments by the previous owner and member of WSCC Steve Morris. Porting alone costs £800.00 at AL Developments. No longer required as I’ve fitted an AP Racing Engines ST170 head and cams. Includes intake and exhaust cams and all springs and followers etc. Collection preferred from near Loughborough due to size and weight. £500.00 I will add more photos over the next few days.
Ansoeb Posted October 5 Posted October 5 Do you know if this would fit a 2.0 Zetec Blacktop. I thought these engines were similar apart from the VVT and bottom end etc.
Naranja_Al Posted October 5 Author Posted October 5 The head will fit dimensionally but you would either need to control the VVT using a suitable ECU and install the VVT solenoid (piston clearances would need checking) or you could delete the VVT and run different cams.
Ansoeb Posted October 5 Posted October 5 Ok, does that mean the Zetec exhaust manifold would mate up also. Thanks
Naranja_Al Posted October 5 Author Posted October 5 Yes the intake and exhaust manifold would mate BUT the openings on the intake manifold would need porting to better match the head.
Ansoeb Posted October 5 Posted October 5 No worries. I think this option would probably create more issues than resolve for me unfortunately. I have an Omex 600 ECU which can't control the cam only switch on off etc. That kind of defeats the purpose of VVT I guess. Thanks anyway 1
Naranja_Al Posted November 12 Author Posted November 12 Finally got round to taking some photos of my spare AL Development ported ST170 head…
Recommended Posts