Big Andy Posted August 25 Share Posted August 25 Hi everyone I'm after a clamp to put on my standard westfield roll cage to mount my insta 360x4 camera or can anyone direct me to wear I can get one from . Many thanks Andy Link to comment Share on other sites More sharing options...
Stuart Davis AO - Devon Cornwall & Somerset Posted August 25 Share Posted August 25 34 minutes ago, Big Andy said: Hi everyone I'm after a clamp to put on my standard westfield roll cage to mount my insta 360x4 camera or can anyone direct me to wear I can get one from . Many thanks Andy Andy, with my X2 I use a Small Rig clamp like this which works well, easy to remove although I also have the quick release clamp from Insta which makes it even easier. https://amzn.eu/d/1XZsIo8 You can also get tube clamps from someone like DuraTruss which are probably more secure, although you need to replace the bolt with one which fits the Insta. this one fits my roll bar, not sure if yours is the same diameter. https://www.thomann.co.uk/duratruss_big_jr._clamp_100kg_black.htm Finally I have also used some like these for other purposes but I’m sure they could be made to work with the Insta… Can’t recall the source for these. I always use a thin wire tether too, just in case, and have the Small Rig cage for it too as that gives extra mounting points for the tether. https://amzn.eu/d/bYZb4lM 2 Link to comment Share on other sites More sharing options...
Big Andy Posted August 25 Author Share Posted August 25 Hi Stuart Many thanks for the info I will check it out and sort one Thanks again mate Andy Link to comment Share on other sites More sharing options...
Naranja_Al Posted August 26 Share Posted August 26 11 hours ago, Big Andy said: Hi Stuart Many thanks for the info I will check it out and sort one Thanks again mate Andy I use one of these https://store.insta360.com/product/x3_utility_frame?c=2114&from=accessory With a GoPro Roll Cage mount https://gopro.com/en/gb/shop/mounts-accessories/large-tube-mount/AGTLM-001.html I’d like to find a mount that would allow me to mount my Insta360 on my roll cage cross member. Currently it is mounted on the top bar in landscape format and it feels a little ‘exposed’. A tether is recommended too as suggested by @Stuart Davis AO - Devon Cornwall & Somerset 1 Link to comment Share on other sites More sharing options...
Chris Larner Posted August 26 Share Posted August 26 Look at this, it’s what I use. Found the GoPro one comes undone if fitted to a fat roll cage. https://www.quadlockcase.co.uk/collections/whats-new/products/quad-lock-360-base-roll-cage-hose-clamp?variant=43906520613039 Link to comment Share on other sites More sharing options...
Naranja_Al Posted August 26 Share Posted August 26 1 hour ago, Chris Larner said: Look at this, it’s what I use. Found the GoPro one comes undone if fitted to a fat roll cage. https://www.quadlockcase.co.uk/collections/whats-new/products/quad-lock-360-base-roll-cage-hose-clamp?variant=43906520613039 Does that allow the camera to be mounted at any angle? Looks good if it does. Link to comment Share on other sites More sharing options...
Flying Carrot Steve Posted August 26 Share Posted August 26 I use this... 1 Link to comment Share on other sites More sharing options...
Chris Larner Posted August 26 Share Posted August 26 Yes, if you combine that with a quad lock mount you can do it at any angle and direction. 1 Link to comment Share on other sites More sharing options...
Stuart Davis AO - Devon Cornwall & Somerset Posted August 26 Share Posted August 26 The Small Rig clamp kit comes with everything to allow full range of movement, only £19.99 and great build quality 👍 https://amzn.eu/d/1XZsIo8 1 Link to comment Share on other sites More sharing options...
Recommended Posts