Wanted insta 360 camera mount for the roll cage

[Big Andy]

Hi everyone I'm after a clamp to put on my standard westfield roll cage to mount my insta 360x4 camera or can anyone direct me to wear I can get one from .

Many thanks Andy 

[Stuart Davis AO - Devon Cornwall & Somerset]

34 minutes ago, Big Andy said:

Hi everyone I'm after a clamp to put on my standard westfield roll cage to mount my insta 360x4 camera or can anyone direct me to wear I can get one from .

Many thanks Andy 

Andy, with my X2 I use a Small Rig clamp like this which works well, easy to remove although I also have the quick release clamp from Insta which makes it even easier.
 

https://amzn.eu/d/1XZsIo8

 

You can also get tube clamps from someone like DuraTruss which are probably more secure, although you need to replace the bolt with one which fits the Insta. this one fits my roll bar, not sure if yours is the same diameter.

 

https://www.thomann.co.uk/duratruss_big_jr._clamp_100kg_black.htm

 

Finally I have also used some like these for other purposes but I’m sure they could be made to work with the Insta… Can’t recall the source for these.

I always use a thin wire tether too, just in case, and have the Small Rig cage for it too as that gives extra mounting points for the tether.

 

https://amzn.eu/d/bYZb4lM

[Big Andy]

Hi Stuart 

Many thanks for the info I will check it out and sort one 

Thanks again mate 

Andy

[Naranja_Al]

11 hours ago, Big Andy said:

Hi Stuart 

Many thanks for the info I will check it out and sort one 

Thanks again mate 

Andy

I use one of these

 

https://store.insta360.com/product/x3_utility_frame?c=2114&from=accessory

 

With a GoPro Roll Cage mount

 

https://gopro.com/en/gb/shop/mounts-accessories/large-tube-mount/AGTLM-001.html

 

I’d like to find a mount that would allow me to mount my Insta360 on my roll cage cross member. Currently it is mounted on the top bar in landscape format and it feels a little ‘exposed’.

 

A tether is recommended too as suggested by @Stuart Davis AO - Devon Cornwall & Somerset

[Chris Larner]

Look at this, it’s what I use.  Found the GoPro one comes undone if fitted to a fat roll cage.

https://www.quadlockcase.co.uk/collections/whats-new/products/quad-lock-360-base-roll-cage-hose-clamp?variant=43906520613039

[Naranja_Al]

1 hour ago, Chris Larner said:

Look at this, it’s what I use.  Found the GoPro one comes undone if fitted to a fat roll cage.

https://www.quadlockcase.co.uk/collections/whats-new/products/quad-lock-360-base-roll-cage-hose-clamp?variant=43906520613039

Does that allow the camera to be mounted at any angle? Looks good if it does.

[Flying Carrot Steve]

I use this...

 

 

[Chris Larner]

Yes, if you combine that with a quad lock mount you can do it at any angle and direction.

[Stuart Davis AO - Devon Cornwall & Somerset]

The Small Rig clamp kit comes with everything to allow full range of movement, only £19.99 and great build quality 👍

 

https://amzn.eu/d/1XZsIo8