Smudge62 Posted March 30, 2024 Posted March 30, 2024 Siltech supplied Wilwood front calipers 120-8726 fitted with Hawk DTC30 race pads Wilwood rear calipers 450-8725 fitted with Hawk DTC30 race pads Wilwood master cylinders 0.625 & 0.75 Hel stainless hoses Siltech supplied lightened rear disc, showing signs of stress cracks Standard rear discs Siltech supplied front caliper brackets Custom front & rear caliper brackets machined from billet and hard anodized The new boxed Hawk pads in the photo are not included, they are for sale separately £700
LoneWolf Posted March 30, 2024 Posted March 30, 2024 I suppose the rear calipers do not have handbrake, is that right?
Smudge62 Posted March 31, 2024 Author Posted March 31, 2024 Correct, this setup is from my track car.
Euan Hoosearmy Posted April 13, 2024 Posted April 13, 2024 What uprights are fronts for? Will they fit Cortina Mk3/M16
Tuner58 Posted April 13, 2024 Posted April 13, 2024 35 minutes ago, Smudge62 said: May split depending on what you want Hi , see you have 6 mounting brackets , would be interested in a pair for front caliper mounts
Smudge62 Posted April 14, 2024 Author Posted April 14, 2024 10 hours ago, Euan Hoosearmy said: What uprights are fronts for? Will they fit Cortina Mk3/M16 They are for the later uprights, were fitted to a 2018 car
Kingster Posted April 14, 2024 Posted April 14, 2024 23 minutes ago, Smudge62 said: They are for the later uprights, were fitted to a 2018 car The WF alloy uprights are all based on cortina upright geometry and fittings though and to my knowledge that never changed.
Euan Hoosearmy Posted April 14, 2024 Posted April 14, 2024 What do we need to measure to be sure? Would the calipers still fit even if I had to buy new brackets from Rally Design/Siltech? Have no problem doing this piecemeal if its cheaper than buying it all new..... (tight git, I know....)
LoneWolf Posted April 14, 2024 Posted April 14, 2024 Second what @Kingster said, all Westfield front uprights are based on the Cortina geometry, so they all share the same caliper mount points.
Euan Hoosearmy Posted April 14, 2024 Posted April 14, 2024 In which case @Smudge62 can I have a price for: Front calipers Brackets (posh ones preferred) Front hoses Postage, unless you're anywhere near East Hampshire... Can you also confirm which diameter discs I'll need?
Kingster Posted April 14, 2024 Posted April 14, 2024 3 hours ago, Euan Hoosearmy said: Brackets (posh ones preferred) Because the uprights are axial fitment and the calipers are radial, you may find that one or more if those mounting brackets will suit different disc diameters by spacing out the caliper.
Smudge62 Posted May 4, 2024 Author Posted May 4, 2024 Both sets of calipers sold One set of hoses sold Both master cylinders sold
Recommended Posts