Chris Larner Posted March 3 Share Posted March 3 After a pair or single front indicator pods. Let me know what you have. Thanks. SORTED Link to comment Share on other sites More sharing options...
Ansoeb Posted March 10 Share Posted March 10 Hi are you by any chance thinking of cutting down the standard indicator pod length. I have just done this with mine and the material cuts cleanly and there is plenty of room to drill and tap for new mounting studs Link to comment Share on other sites More sharing options...
Chris Larner Posted March 10 Author Share Posted March 10 Yes possibly. Did you buy new ones or but originals Link to comment Share on other sites More sharing options...
Ansoeb Posted March 10 Share Posted March 10 I bought a second hand one to experiment with as it was cheaper than scraping one accidentally. I cut about 80mm off. Here is before and after. I always thought the indicator proportion to headlights was off 3 Link to comment Share on other sites More sharing options...
Chris Larner Posted March 10 Author Share Posted March 10 Nice. Ideally want to do the same. That’s why I’m after 2 new or used ones. Link to comment Share on other sites More sharing options...
Ansoeb Posted March 10 Share Posted March 10 Take your time on the cutting angle and they are no bother I used loctite 641 instead of thread lock to fix the studs. Bandsaw with a straight edge rather than cut by hand etc Link to comment Share on other sites More sharing options...
Ansoeb Posted March 10 Share Posted March 10 Finished article 4 Link to comment Share on other sites More sharing options...
Recommended Posts