Stu Faulkner Posted November 13, 2023 Share Posted November 13, 2023 All parts have been taken from the turbo build that I completed last year and has completed 4000 miles. I will add more parts as they are removed. Someone has first dibs on the motor but if that falls through then that will be fore sale as well. Coolex intercooler and radiator. Does not leak. 63mm intercooler pipes. The units were bought as a package so are bolted together. https://www.coolexperts.co.uk/product/vw-polo-derived-radiator-intercooler-fan-combo-westfield-kit-cars/ £600 new, asking £420. postage would be extra. Bofi racing clutch. More than capable of handling the 280BHP that I had and isn't to heavy or snatchy. Loads of meat left on it, Needs a release bearing, £400 from Bofi, £100 Postage extra. Custom exhaust manifold and down pipe. Fits a TD04/13 and goes out the same hole in the body that the standard factory exhaust went through. Dave fab manifold. I have a V band clamp for it. £250.00 postage extra. Flowforce 660 injectors with MX% conversion. £400 new, 270.00 inc postage to the UK. Skunk2 inlet manifold and throttle body. TPS and ICAV not included. Trimmed the side of the throttle linkage for bonnet clearance. £860 new asking £650. postage extra. 2 Link to comment Share on other sites More sharing options...
Stu Faulkner Posted December 30, 2023 Author Share Posted December 30, 2023 Turbo engine. Only done 4000 miles since build. Bored out to 1880cc with 40 thou oversized Weisco pistons Maxspeeding rods 20 thou Cometic head gasket All new bearings, rings and seals. Head and block skimmed. ARP main, rod and head bolts. Gates water pump kit and belt. Standard head stripped and new buckets fitted. I have all the receipts and paperwork including the power graph where this engine made 280BHP with a TD04/13 and a boost controller. Comes as it is in the pictures, I do have a set of cam pulleys but it will need an oil pump and bottom pulley as I have used them on my new engine. I have priced all this up and it cost me at least £2500 to build this, I'm asking £1200 which to be honest if It was less I would strip it for the bolts and rods which I would use on my next build and just sell it as a 1880cc block and pistons. I can post pics if required but they are on my build diary here. Link to comment Share on other sites More sharing options...
Stu Faulkner Posted December 30, 2023 Author Share Posted December 30, 2023 6 speed gearbox Rebuilt gear linkage with brass bush. Input and output seals replaced 4000 miles ago £450 Link to comment Share on other sites More sharing options...
Stu Faulkner Posted January 22 Author Share Posted January 22 Bump. Last chance before I start selling on Ebay. Discounts possible. Link to comment Share on other sites More sharing options...
Yanto Posted January 26 Share Posted January 26 Stu, I'll have a word with one of my lads who's having problems with his current engine, won't see him until late 27th though. but just to make sure the engine at £1200 is without the turbo and items listed separately? Ian Link to comment Share on other sites More sharing options...
Stu Faulkner Posted February 20 Author Share Posted February 20 On 26/01/2024 at 17:26, Yanto said: Stu, I'll have a word with one of my lads who's having problems with his current engine, won't see him until late 27th though. but just to make sure the engine at £1200 is without the turbo and items listed separately? Ian Hi Ian Sorry, only just seen this but yes, Its £1200 for just the engine. Link to comment Share on other sites More sharing options...
Recommended Posts