Naranja_Al Posted January 22 Posted January 22 New wheels and tyres now fitted. Not the best photograph. Need the weather to improve so I can get out for a blat. 8 Quote
Andrzej Posted January 24 Posted January 24 Recived mine rebuilded gearbox with new longer - 2.98 1st, new bearings, synchros, gaskets, seals, cleaned inside and outside. Now excercise and acrobatics to install.. 4 Quote
RickRack Posted January 26 Posted January 26 On 22/01/2025 at 14:26, Naranja_Al said: New wheels and tyres now fitted. Not the best photograph. Need the weather to improve so I can get out for a blat. Them look the dogs danglers 👍 1 Quote
Flying Carrot Steve Posted January 26 Posted January 26 On 24/01/2025 at 17:30, Andrzej said: Recived mine rebuilded gearbox with new longer - 2.98 1st, new bearings, synchros, gaskets, seals, cleaned inside and outside. Now excercise and acrobatics to install.. Where did you get it done @Andrzej? Quote
Andrzej Posted January 26 Posted January 26 1st 2.98 and seals , gaskets - from Burton Power . Synchros from Motomobil.de Work - service and bearings - local in Poland, service specialised in Motorsport rally cars boxes and diffs, which previously fabricated for mine track Westfield mt75 with H type straight gears dog box with choosen ratios also with long 1st, and few differentials . But no acrobatics this weekend- found some Play in UJ joint on proposhaft.. (only 5k kilometers from build, ppor UJ) Hope next weekend to install all properly. 1 Quote
GaryH Posted January 27 Posted January 27 @dvd8n Yep. Also, don't spend too long looking for the sump plug! Gary 1 Quote
Quinten Posted February 6 Posted February 6 Did someone take a bite out of it, or is my eyesight terrible? 4 Quote
DeanMegaS2000 Posted February 6 Posted February 6 4 hours ago, DeanMegaS2000 said: 20mm for my rear wheels Straight into the garage and fit 3 Quote
evosteve Posted February 6 Posted February 6 It may be the angle of the photo but the original studs look too long. Quote
Naranja_Al Posted February 6 Posted February 6 9 minutes ago, evosteve said: It may be the angle of the photo but the original studs look too long. Some wheels have pockets on the back that give enough space for the original studs to fit uncut. 1 1 Quote
DeanMegaS2000 Posted February 6 Posted February 6 8 minutes ago, evosteve said: It may be the angle of the photo but the original studs look too long. The studs are sticking out past the spacer. I was expecting to have to cut them shorter, but found that my alloys have recesses between the stud holes on the inside. So the wheels sit on, no problems at all. This has made me even happier with the whole thing, as I can retain the original stud lengths and revert back without issue now, If I ever wanted to. 1 1 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.