NDS Posted December 20, 2022 Posted December 20, 2022 Westfield SE Live axle Q720 RNH on Sorn First registered 1989 Photos : New panels and floor Steering rack diagonal Pre - strip down condition The chassis had two frost damaged tubes. These have been cut out and replace (On jig) Chassis jigged and new alloy panels (Martin Batho) manufactured with HD 16swg floor, bulkhead with bias bar inspection panel , Floor mounted bias pedal box with remote M/C Roll loop with harness bars and welded down links Bodywork : Tub, Scuttle , nose cone and boot box , ( no bonnet) Carbon aero screen - low blade type Alloy Fuel Tank - carb - single push on outlet Fuel Pump Windscreen and uprights Front suspension with Cortina uprights , M16 caipiers and solid discs, Steering rack and down link Gaz alloy coil overs single adjustable. English axle, drum brakes with link bars and Panhard rod Box of the usual detritus from an abandoned project : wiring harness, old school dash board , radiator with fan, seats , four point harnesses, seats hood, wheels and tyres. £4600.00 Engine gearbox package(s) 1600cc Sigma Engine with Puma inlet and throttle body, Newman phase II cams - £300 Sigma Lightweight flywheel, Helix clutch pack and ARP bolts – NEW £1000 One of the best upgrades Sigma DCOE inlet manifold – New £150 Sigma to type 9 bellhousing - New – £150 Ford type 9 ( with gear stick extension ) - £300 Elite Sequential gearbox, Sigma bellhousing , concentric release bearing , Gear positioning indicator. £3800 Sigma DCOE inlet manifold with 30mm Jenvey throttle bodies, injector rail – 6 fittings , carbon filter housing , selection of DCOE spaces and short trumpets – POA Hayabusa engine 42K removed from bike with full-service history harness, keys and fuel pump available. Hayabusa – Carburettor setup ex - Radical SR3 compete with harness and MDE ECU - Free with the above engine
Paul Harveyboy Posted January 19, 2023 Posted January 19, 2023 Hi I'm intrested in the chassis. Would u be willing to just sell that please.
NDS Posted January 20, 2023 Author Posted January 20, 2023 Sorry no it go's complete. ( or I need to rebuild it ) Thanks for the interest
NDS Posted January 24, 2023 Author Posted January 24, 2023 Just to clarify the damage done to the tubes was water/frost.
Recommended Posts