mikey p Posted August 11, 2022 Posted August 11, 2022 Aluminium front hubs. Brought off here a while a go but these in need of some work to make them usable.  Brand new but have poorly machined bearing surfaces meaning that disk run out is bad. (Unfortunately common for Hispec 😔)  Bearing races need to be turned out and sleeved or run an oversize bearing to make them good.  Have studs fitted.  One hole for the disk mount also had a helicoil which isn't seated correctly and would need fixing.  Anyone with a lathe or willing to take to a machine shop could get these sorted and would be cheap hubs?  £50  Can give to a courier if you arrange.
Recommended Posts