Yorkshire_Pudding Posted August 4, 2022 Share Posted August 4, 2022 I have for sale my Westfield chassis harness from my 2020 kit. I was going to use this but decided to make my own to eradicate all the extra plugs and wires I didn’t need. This harness has the fog light controller. To trace some wires I have cut some of the harness wrap out but I’ve got a roll of the same stuff to replace them. I have made some slight modifications to the harness which are; - shortened fuel level sensor wires - replaced front speed sensor wires with an AMP superseal connector. The harness is covered in split conduit tubing for when it was clipped into the chassis. I’ve only got one Fuse box but these are regularly available from CBS and other kit car parts stores. Included in the kit; - chassis harness - 1 x Fuse Box - 1 x Harness Tape Wanting £300 for it. Would prefer collection from Penistone, Barnsley but can post at extra cost. Thanks Andy Link to comment Share on other sites More sharing options...
BLOGGY S7 Posted August 4, 2022 Share Posted August 4, 2022 Pm sent. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts