Richard (OldStager) Posted June 29, 2022 Share Posted June 29, 2022 Does anyone have a bezel going spare, CBS to sell small ones but are out of stock (according to the website). The gaiter I bought is quite small at its base so I need something around 3 1/2 square internal, I can make one but thought I would ask here first. Link to comment Share on other sites More sharing options...
Jim RS Posted June 29, 2022 Share Posted June 29, 2022 As you've got the original it's easy peasy to make and you can make it in material to match or contrast your interior. Confession, I only made the handrake gaiter as the Cosworth rubber one is still looking good after 34 years, oh the shortcomings of modern materials! 1 Link to comment Share on other sites More sharing options...
Richard (OldStager) Posted June 29, 2022 Author Share Posted June 29, 2022 21 minutes ago, Jim RS said: As you've got the original it's easy peasy to make and you can make it in material to match or contrast your interior. Confession, I only made the handrake gaiter as the Cosworth rubber one is still looking good after 34 years, oh the shortcomings of modern materials! Sadly Jim I don't have the original one, its never had one. The car was stripped when I got it (ex autotest car), and the gaiter I did have was far bigger around its base, so you never saw the actual cutout as above. I can make one all the same, as as you say I can match it to my recent retrim. Link to comment Share on other sites More sharing options...
Richard (OldStager) Posted June 29, 2022 Author Share Posted June 29, 2022 Scrub this post sorry. I made something up instead. Link to comment Share on other sites More sharing options...
Recommended Posts