westchnord Posted January 22, 2022 Share Posted January 22, 2022 hello kent crossflow engine mounts wanted thanks in advance Link to comment Share on other sites More sharing options...
Richard (OldStager) Posted January 22, 2022 Share Posted January 22, 2022 I don't have any, but which do you want. The 'standard' Ford ones that were generally oblong in shape that contained the rubber block within it, or the Westfield type, which was a bracket from the block to which you fitted typically a round rubber mount sandwiched between a WF supplied chassis bracket - or doesn't it matter ?. Link to comment Share on other sites More sharing options...
westchnord Posted January 29, 2022 Author Share Posted January 29, 2022 Hello What is the part number of the ford part please if you know it ? Thanks Best regards Link to comment Share on other sites More sharing options...
Richard (OldStager) Posted January 29, 2022 Share Posted January 29, 2022 No idea of what the Ford numbers were, but if it's the oblong ones, Burtons have them here https://www.burtonpower.com/engine-brackets-ford-escort-mk1-mk2-x-flow-fp294.html Link to comment Share on other sites More sharing options...
Richard (OldStager) Posted January 29, 2022 Share Posted January 29, 2022 Are the mounts you want going on the same engine that was in the car already, or is this another block being fitted ?. I ask because if your chassis bracket was fitted with a 711 block, anything older than this (691, 681 etc) will need 10mm spacers between the block and the engine mount. 691 and earlier blocks have narrower mounting lugs on the exhaust side than a 711. Link to comment Share on other sites More sharing options...
GarethHD Posted February 5, 2022 Share Posted February 5, 2022 I think I might have a spare pair of the oblong type with the rubber mounts, I'll have a look tomorrow and if I have, I'll send you some photos. Gareth 1 Link to comment Share on other sites More sharing options...
Recommended Posts