Big Andy Posted January 8, 2022 Posted January 8, 2022 (edited) I'm after a raceline sump for my 1800 zetech engine as at min its got the standard sump on it Edited January 11, 2022 by Ian Kinder (Bagpuss) - Joint Peak District AO improved title
dhutch Posted January 11, 2022 Posted January 11, 2022 I don't have one, but is it for a blacktop or silvertop? Same sump casting but different baffles/windage tray etc. Having bought a used one for a silvertop and converted it, if doing it again I would buy new I think. Not a lot of cost saved because the used one are few and far between, and the baffle plate screws where all stuck in which what i can only assume was stud lock! Daniel
DamperMan Posted January 12, 2022 Posted January 12, 2022 Also there are further 2 variants depending on if the starter is exhaust side or induction. Ginetta used them on the race cars which might help with the search for used.
Haflingerman Posted January 19, 2022 Posted January 19, 2022 On 08/01/2022 at 23:35, Big Andy said: I'm after a raceline sump for my 1800 zetech engine as at min its got the standard sump on it Andy I have a shallow sump if you are interested,it’s not a race line one but it fits a 1800 Zetec silver top and is 155mm deep and is in good condition also has the oil pick up.there are no bolts or gasket’s included though.i am looking for around the £200 mark plus carriage if you are interested.colin (haflingerman) On 12/01/2022 at 14:12, DamperMan said: Also there are further 2 variants depending on if the starter is exhaust side or induction. Ginetta used them on the race cars which might help with the search for used.
Recommended Posts