Ali and Gail Posted November 12, 2021 Share Posted November 12, 2021 Any one got anything out there please. Link to comment Share on other sites More sharing options...
Kingster Posted November 13, 2021 Share Posted November 13, 2021 I just used a bit of aluminium mesh cut to shape - 👍 1 Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted November 14, 2021 Share Posted November 14, 2021 And the fairly inexpensive Audi style plastic mesh is very popular, too. Has the added bonus of not rusting, either! 1 Link to comment Share on other sites More sharing options...
Stu Faulkner Posted November 14, 2021 Share Posted November 14, 2021 3 hours ago, Dave Eastwood (Gadgetman) - Club Secretary said: And the fairly inexpensive Audi style plastic mesh is very popular, too. Has the added bonus of not rusting, either! That’s what I did. 1 Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted November 14, 2021 Share Posted November 14, 2021 Yup, me too. (Proper nose back on for tomorrows sad duty.) 3 Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted November 14, 2021 Share Posted November 14, 2021 The other plus, is that the plastic grill is much more open than the stock metal one, so can knock a degree or two off your running temperatures, sometimes. 1 Link to comment Share on other sites More sharing options...
Jim RS Posted November 14, 2021 Share Posted November 14, 2021 Plastic mesh is cheap and plentiful on ebay, cuts very easily with safe edges not the razor cuts of metal mesh. Did some rough calculations and air space is over 50% better than metal mesh: my fitments has slashed temperature build up with this summers trials keeping engine temperatures well below low 90 degrees even when spirited driving. Last proof will be track day performance🤞 3 Link to comment Share on other sites More sharing options...
Ali and Gail Posted November 15, 2021 Author Share Posted November 15, 2021 Going down the plastic mesh route, thanks all for the advice 1 Link to comment Share on other sites More sharing options...
Recommended Posts