cast iron Posted August 18, 2021 Posted August 18, 2021 Saloons and sports cars Side cars motorbikes all in one weekend event, but not in one race! Quote
cast iron Posted August 23, 2021 Author Posted August 23, 2021 awesome weekend, qualified P3 overall in the wet out performing some much bigger cars however for the races it dried and the slicks and power boys came through. I did manage to get up to P2 from P12 on the grid for one race However then this happened ;-( 1 Quote
Richard (OldStager) Posted August 23, 2021 Posted August 23, 2021 Good save, was everything OK afterwards?. Quote
Andrew Posted August 23, 2021 Posted August 23, 2021 Lucky you weren't collected there Mark.. could have been nasty. Mike's Evo's a bit nippy off the line isn't it. Quote
Nick Algar - Competition Secretary Posted August 23, 2021 Posted August 23, 2021 Great to see you at the weekend Mark. That was a real shame for that race, you were going well in the first race. Quote
cast iron Posted August 24, 2021 Author Posted August 24, 2021 just the usual wrecked starter motor that bike engines can suffer in a spin all fixed now 1 Quote
cast iron Posted August 24, 2021 Author Posted August 24, 2021 race 1 a bit of a better outcome overall class win and 5th overall Quote
Richard (OldStager) Posted August 24, 2021 Posted August 24, 2021 I don't suppose there is an easy fix whereby the starter is dis-engaged once run? Quote
cast iron Posted August 24, 2021 Author Posted August 24, 2021 2 minutes ago, OldStager said: I don't suppose there is an easy fix whereby the starter is dis-engaged once run? bike engines have a strange set up where the starter is permanently engaged to the gearbox with a reverse ratchet clutch to stop the engine spinning the motor, however when going backward it engages and disintegrates the starter internals Quote
Richard (OldStager) Posted August 24, 2021 Posted August 24, 2021 11 minutes ago, cast iron said: bike engines have a strange set up where the starter is permanently engaged to the gearbox with a reverse ratchet clutch to stop the engine spinning the motor, however when going backward it engages and disintegrates the starter internals Somebody far cleverer than I needs to design one that completely dis- engages, you can't be the only one this happens to. Quote
cast iron Posted August 24, 2021 Author Posted August 24, 2021 10 hours ago, OldStager said: Somebody far cleverer than I needs to design one that completely dis- engages, you can't be the only one this happens to. People with skill press the clutch! 1 Quote
cast iron Posted August 24, 2021 Author Posted August 24, 2021 Sundays mod prod race entered as a guest, starting from the back, made it up to 2nd for nearly a lap! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.