judder Posted May 15, 2020 Share Posted May 15, 2020 Time for some items to go, I seem to just hold onto things - must be a bit of a hoarder. All prices plus postage. Edit - Lock set is Sold Plastic indicator pods are sold Megasquirt is sold Innovate LM-1 sold Engine,wheels,exhaust,inlet/exhaust manifolds,link pipe sold Sold Westfield Zetec Stainless exhaust manifold, stainless link pipe, Wunoff 6inch polished stainless steel, non cat silencer with couplings. Silencer has been repacked from Wunoff a few years ago. Manifold has a small weld where it was rubbing against something, think it was the breather - not seen when fitted, and the silencer has a few marks and a couple of scratches on the underside. I've tried to take photos of these marks but aren't noticeable once fitted. More photos on request. £350. . Sold Zetec DCOE intake manifold, 65mm. I fitted 12mm TH TB Jenvey spacers on this to fit my SF throttle bodies. Has 3No tappings for Map sensors. £80 Westfield indicator pods (Metal), painted chrome yellow but has some chipping, Complete with lights, bulbs etc. £offers Sold Plastic Indicator pods for mounting below the headlights, including lenses, bulbs etc. One has a bit of plastic missing, but not seen when fitted. £20. Aluminium Hub spacers 20mm to suit ford. I ran them for a couple of hundred miles and they looked great but made the tyres just rub the arch a little on the bounce. £offers SOLD Westfield bonnet lock set. I bought these with the intention of fitting, then changed my mind. I believe these are no longer made. Comes with templates from Westfield and 4 keys !. £45. Sold Megasquirt 1 ECU with V3 board, made by Bill Shurvinton. Mapped for 1.8 Zetec. With 2No coil drivers. £100. SOLD Innovate LM-1 air/fuel ratio meter. Only thing that's not in the box is the exhaust bung (not needed if you keep the lambda probe in) and the 3mm analog out cable. The cable can be bought as a spare and the bung is currently fitted the the manifold i'm selling !. £100. Pics on request as it appears i've reached my data limit for the post. Thanks for looking, Stephen. Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted May 15, 2020 Share Posted May 15, 2020 Yep, the bonnet lock sets are no longer made, and rare as hens teeth, now. Link to comment Share on other sites More sharing options...
Kingster Posted May 15, 2020 Share Posted May 15, 2020 Ooh bonnet locks please! Need a set for my other bonnet 😁 Edit - I assume they are Keyed alike? Odd to have 4 keys! Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted May 15, 2020 Share Posted May 15, 2020 16 minutes ago, Chris King - Webmaster and Joint North East AO said: Edit - I assume they are Keyed alike? Odd to have 4 keys! that was normal, each lock came with two keys, and the bonnet locks, when I had mine, at least, were always supplied as a (keyed) pair. Link to comment Share on other sites More sharing options...
Kingster Posted May 15, 2020 Share Posted May 15, 2020 1 minute ago, Dave Eastwood (Gadgetman) - Club Secretary said: that was normal, each lock came with two keys, and the bonnet locks, when I had mine, at least, were always supplied as a (keyed) pair. Mine came with just the two - stupidly huge things! 1 Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted May 15, 2020 Share Posted May 15, 2020 Got even dafter if you had the ZK locking boot box, that originally, before the lock design change, when this style were no longer available, came with another two key matched locks and another four of those huge keys! I had eight of them at one point!! Link to comment Share on other sites More sharing options...
Gary Taylor Posted May 16, 2020 Share Posted May 16, 2020 Ahhh to slow for the locks ☹️ Link to comment Share on other sites More sharing options...
Paul T Posted May 16, 2020 Share Posted May 16, 2020 I may be interested in ECU, will PM you 👍🏻 Link to comment Share on other sites More sharing options...
Martin Letts - Joint Hampshire & IOW AO Posted May 16, 2020 Share Posted May 16, 2020 Can I please have the indicators that mount below the headlights, will PM you Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted May 16, 2020 Share Posted May 16, 2020 11 hours ago, judder said: Pics on request as it appears i've reached my data limit for the post. There are only limits per each individual post, to many also makes an individual post very tricky to read sometimes, just spread them over a couple or more posts within the same thread and you’ll be fine! Link to comment Share on other sites More sharing options...
Kingster Posted May 16, 2020 Share Posted May 16, 2020 11 hours ago, judder said: Pics on request as it appears i've reached my data limit for the post. That’s just the limit for one “post” not the entire thread so feel free to add more. 👍 1 Link to comment Share on other sites More sharing options...
judder Posted May 16, 2020 Author Share Posted May 16, 2020 SOLD ok, here are the photos of the LM-1 I'm selling. Nice piece of kit and was a great help in tuning the mega squirt ecu. I've noticed the battery cover doesn't want to stay in place !. Sorry, for some reason the pictures came out upside down !. Link to comment Share on other sites More sharing options...
judder Posted May 16, 2020 Author Share Posted May 16, 2020 Also have a low mileage 1.8 zetec supplied new from Westfield with paperwork if anyones interested. Comes with a modified for RWD and shallower sump and pickup pipe. Also has a gloss black powder coated cam cover. Really nice clean package but not very popular. Again, not very popular, I have 5No Rimtechs supplied from Westfield fitted with Toyo T1-r tyres. Any interest ? I'm open to offers. Link to comment Share on other sites More sharing options...
Martin Letts - Joint Hampshire & IOW AO Posted May 16, 2020 Share Posted May 16, 2020 What do you want for the engine? Link to comment Share on other sites More sharing options...
judder Posted May 16, 2020 Author Share Posted May 16, 2020 Not sure Martin, i suppose the money is in the sump, but it would be a shame to split it. Link to comment Share on other sites More sharing options...
Recommended Posts