Rear ends be sensible please

[Kevin Pullen]

 Couple of questions

 

1. Where do people get the large Westfield logo to go in the spare wheel recess

 

2 . Show me pics of your rear ZK rear ends as trying to decide whether to put a bike plate on the left hand side side or where to mount full size top or bottom in the middle

 

 

 

 

[GaryH]

Hi Kevin

 

I'm pretty sure that the logo is available from the factory. Photo of my ZK bodied car.

 

Gary

[Jackv4]

I looks good with the Westfield logo, my current and old, Only rear end photos I have

[Kingster]

std plate for me... 

 

 

[KugaWestie]

I settled on a square plate in the end

 

[Robin Parker (Red Spider) - Yorkshire AO]

Standard size square plate. 

[Matt_S]

No plate yet but here’s mine
 

[SootySport]

Available from the factory Kevin.

[Andrew]

Here's mine. 

 

 

[6carjon]

 

[Burgerbob]

I removed the spare wheel last year and went for a standard sized plate but in a plinth with the lights built in.  My next job is swapping the fog and reverse lights for some that are smaller and lower profile as the standard ones stick out a lot.

[CosKev]

17 hours ago, Kevin Pullen - WSCC Treasurer said:

put a bike plate

 

You've really no excuse to run a smaller plate on the rear,massive flat area to fit a standard plate!

No excuses about not having anywhere to fit a standard plate like you have on a nose cone when the old bill stop you.

Cost me £100 running a smaller front plate last year 🤦‍♂️

[Dave Eastwood (Gadgetman)]

Yeah, although I've always had either a slightly smaller or even occasionally no front plate on my Westfields, the rear has always been perfectly legit. It's hard to justify anything else.

[Davemk1]

I asked the Westfield importer to the USA if he had any of the large logos for the rear and he didn't.....so he had some made. Very cool.

 

dave

[BillyPee]

I have a standard size square plate, stuck onto a black plastic holder. The holder is screwed into jack nuts in the tub. Covers up the holes (well some of them).