1960dave Posted April 7, 2020 Share Posted April 7, 2020 Has anyone got a photo of how the wiring should look going through the tunnel. As the nhs have put me on house arrest for 12 weeks I might as well build m car but trying to get the loom to look nice is a mare. Quote Link to comment Share on other sites More sharing options...
Ian Kinder (Bagpuss) - Joint Peak District AO Posted April 8, 2020 Share Posted April 8, 2020 Hi Dave, Are we talking you narrow body car here? I've only got knowledge of my 2015 S2000 Chassis. My loom was in and out 3 times before I was happy. Sorry to hear you're under house arrest. Take care and stay safe! Quote Link to comment Share on other sites More sharing options...
1960dave Posted April 8, 2020 Author Share Posted April 8, 2020 Its a zetec wide bodied removable rear wing car. It has the standard zetec injection loom running a zetec with oe injection. I am thinking about re doing the loom at the engine bulkhead end so it looks tidyer. Quote Link to comment Share on other sites More sharing options...
Alan Cutler (Adge) - Dorset AO Posted April 8, 2020 Share Posted April 8, 2020 Loom mount positions for a Sport 250, may give you some ideas possibly? Quote Link to comment Share on other sites More sharing options...
1960dave Posted April 9, 2020 Author Share Posted April 9, 2020 On 08/04/2020 at 10:51, Adge Cutler- Dorset AO said: Loom mount positions for a Sport 250, may give you some ideas possibly? Thanks for that it was the nasty part by the firewall but I modified it to make it look neater and not like a dried out spider 2 Quote Link to comment Share on other sites More sharing options...
Wilfman Posted April 9, 2020 Share Posted April 9, 2020 Stay safe Dave Quote Link to comment Share on other sites More sharing options...
1960dave Posted April 9, 2020 Author Share Posted April 9, 2020 Cheers Mark I now have 12 weeks off on full pay so the brand new never finished or started really might just get finished. It's going to be so plain Jane with standard zetec injection. I might just be asking loads of questions though . 2 Quote Link to comment Share on other sites More sharing options...
Wilfman Posted April 9, 2020 Share Posted April 9, 2020 Always happy to chip in with ideas / photos Dave. Quote Link to comment Share on other sites More sharing options...
1960dave Posted April 9, 2020 Author Share Posted April 9, 2020 Thanks Mark. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.