Innovate lm2 wideband

[wizzer]

Anyone got one lying around that's not needed. 

Cheers Tony 

[Steve (stevel)]

I have Tony, Andy had put his name on it but not heard from him for a while, it needs a lambda sensor it burnt out towing your car😁😁.

I will contact him see if he still wants it if your interested.

Steve

[wizzer]

Hi Steve 

Thanks for the offer but I'm not sure we're talking about the same thing.

https://www.demon-tweeks.com/innovate-motorsports-lm-2-wideband-air-fuel-meter-2005112/

Cheers Tony 

 

[wizzer]

Bump

[Crash test dummy]

Tony,

 

Get yourself on of these and a cheap AFR gauge that runs 0-5V.

 

https://www.ebay.co.uk/itm/INNOVATE-LC-2-Digital-Wideband-Controller-with-LSU-4-9-Sensor/183969133996?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

 

Or one of these:

 

https://www.ebay.co.uk/itm/UEGO-Air-Fuel-Ratio-AFR-Controller-Wideband-KIT-Bosch-LSU-4-9-Probe-With-Gauge/123931924568?hash=item1cdaeb1858:g:kvIAAOSwljFdudEy

[Kingster]

Thanks for the link Steve just ordered one 😁

[wizzer]

15 minutes ago, Chris King - Webmaster and Joint North East AO said:

Thanks for the link Steve just ordered one 😁

Which one have you ordered, 

Not sure what i want to go for yet, I didn't really want a gauge on the dash that's the reason I was looking at the lm2, 

Tony 

[Kingster]

37 minutes ago, wizzer said:

Which one have you ordered, 

Lc2 - plan to wire into my DTA ECU as it can send readings via can to my aim dash. 
 

Have had a long standing cold start mapping issue and a bit too much “asbo” behaviour off throttle that I’d like to tweak out so the wide band will help with that. 

[Dave Eastwood (Gadgetman) - Club Chairman]

Done exactly that Chris. LC2 into DTA, Can link into AiM dash.

 

Have a “mapping” screen on the dash, with as well as the usual T’s and  P’s, RPM, TPS and AFR.

 

The ECU can also log the AFR readings for back-at-home analysis, too.

[Crash test dummy]

10 hours ago, Chris King - Webmaster and Joint North East AO said:

Thanks for the link Steve just ordered one 😁

 They are I good price, I didn't realise quite how "cheap" they are.

 

One left now and it's got my name on it!

[Crash test dummy]

10 hours ago, wizzer said:

Which one have you ordered, 

Not sure what i want to go for yet, I didn't really want a gauge on the dash that's the reason I was looking at the lm2, 

Tony 

 

No need to mount the gauge in the dash. Make a  little case up for it so that you can use it remotely as a display in the garage.

 

Or if you have a free analogue channel on your Dash 2 run the 0-5V output to it and display the readout there.

[wizzer]

1 hour ago, Crash test dummy said:

 

Or if you have a free analogue channel on your Dash 2 run the 0-5V output to it and display the readout there.

Thanks Steve 

I have got one channel left on the dash 2  I've been looking for info to see if I could display it there  but couldn't find anything, will there be a option for it or will I have to calibrate the dash, if your going for that last one I'll get mine from tweeks it's got an option for a shorter cable. 

Thanks Tony 

[Steve (sdh2903)]

If you don't need a guage the spartan2 get very good reviews. Its what I used on mine into the emerald ecu.

 

http://www.extraefi.co.uk/products/accessories.html

[Crash test dummy]

2 hours ago, wizzer said:

Thanks Steve 

I have got one channel left on the dash 2  I've been looking for info to see if I could display it there  but couldn't find anything, will there be a option for it or will I have to calibrate the dash, if your going for that last one I'll get mine from tweeks it's got an option for a shorter cable. 

Thanks Tony 

Tony,  the Dash2 looks for a 0-5v input and you can scale the ouput (display) against the input v. the output v from the lambda controller is linear so it's easy enough to do. Spartan one looks good, doesn't seem to have a lot of the features of the Innovate but if all you need is a 0-5v output then ideal. If you want the Innovate help yourself. I've found the same at £160 elsewhere. According to Innovate you can shorten the lead if needed.

Steve.

[wizzer]

Thanks everyone now sorted. 

Tony