wizzer Posted April 6, 2020 Share Posted April 6, 2020 Anyone got one lying around that's not needed. Cheers Tony Link to comment Share on other sites More sharing options...
Steve (stevel) Posted April 6, 2020 Share Posted April 6, 2020 I have Tony, Andy had put his name on it but not heard from him for a while, it needs a lambda sensor it burnt out towing your car😁😁. I will contact him see if he still wants it if your interested. Steve Link to comment Share on other sites More sharing options...
wizzer Posted April 6, 2020 Author Share Posted April 6, 2020 Hi Steve Thanks for the offer but I'm not sure we're talking about the same thing. https://www.demon-tweeks.com/innovate-motorsports-lm-2-wideband-air-fuel-meter-2005112/ Cheers Tony Link to comment Share on other sites More sharing options...
wizzer Posted April 14, 2020 Author Share Posted April 14, 2020 Bump Link to comment Share on other sites More sharing options...
Crash test dummy Posted April 14, 2020 Share Posted April 14, 2020 Tony, Get yourself on of these and a cheap AFR gauge that runs 0-5V. https://www.ebay.co.uk/itm/INNOVATE-LC-2-Digital-Wideband-Controller-with-LSU-4-9-Sensor/183969133996?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649 Or one of these: https://www.ebay.co.uk/itm/UEGO-Air-Fuel-Ratio-AFR-Controller-Wideband-KIT-Bosch-LSU-4-9-Probe-With-Gauge/123931924568?hash=item1cdaeb1858:g:kvIAAOSwljFdudEy 1 Link to comment Share on other sites More sharing options...
Kingster Posted April 14, 2020 Share Posted April 14, 2020 Thanks for the link Steve just ordered one 😁 Link to comment Share on other sites More sharing options...
wizzer Posted April 14, 2020 Author Share Posted April 14, 2020 15 minutes ago, Chris King - Webmaster and Joint North East AO said: Thanks for the link Steve just ordered one 😁 Which one have you ordered, Not sure what i want to go for yet, I didn't really want a gauge on the dash that's the reason I was looking at the lm2, Tony Link to comment Share on other sites More sharing options...
Kingster Posted April 14, 2020 Share Posted April 14, 2020 37 minutes ago, wizzer said: Which one have you ordered, Lc2 - plan to wire into my DTA ECU as it can send readings via can to my aim dash. Have had a long standing cold start mapping issue and a bit too much “asbo” behaviour off throttle that I’d like to tweak out so the wide band will help with that. 1 1 Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted April 14, 2020 Share Posted April 14, 2020 Done exactly that Chris. LC2 into DTA, Can link into AiM dash. Have a “mapping” screen on the dash, with as well as the usual T’s and P’s, RPM, TPS and AFR. The ECU can also log the AFR readings for back-at-home analysis, too. 1 Link to comment Share on other sites More sharing options...
Crash test dummy Posted April 15, 2020 Share Posted April 15, 2020 10 hours ago, Chris King - Webmaster and Joint North East AO said: Thanks for the link Steve just ordered one 😁 They are I good price, I didn't realise quite how "cheap" they are. One left now and it's got my name on it! Link to comment Share on other sites More sharing options...
Crash test dummy Posted April 15, 2020 Share Posted April 15, 2020 10 hours ago, wizzer said: Which one have you ordered, Not sure what i want to go for yet, I didn't really want a gauge on the dash that's the reason I was looking at the lm2, Tony No need to mount the gauge in the dash. Make a little case up for it so that you can use it remotely as a display in the garage. Or if you have a free analogue channel on your Dash 2 run the 0-5V output to it and display the readout there. Link to comment Share on other sites More sharing options...
wizzer Posted April 15, 2020 Author Share Posted April 15, 2020 1 hour ago, Crash test dummy said: Or if you have a free analogue channel on your Dash 2 run the 0-5V output to it and display the readout there. Thanks Steve I have got one channel left on the dash 2 I've been looking for info to see if I could display it there but couldn't find anything, will there be a option for it or will I have to calibrate the dash, if your going for that last one I'll get mine from tweeks it's got an option for a shorter cable. Thanks Tony Link to comment Share on other sites More sharing options...
Steve (sdh2903) Posted April 15, 2020 Share Posted April 15, 2020 If you don't need a guage the spartan2 get very good reviews. Its what I used on mine into the emerald ecu. http://www.extraefi.co.uk/products/accessories.html 1 1 Link to comment Share on other sites More sharing options...
Crash test dummy Posted April 15, 2020 Share Posted April 15, 2020 2 hours ago, wizzer said: Thanks Steve I have got one channel left on the dash 2 I've been looking for info to see if I could display it there but couldn't find anything, will there be a option for it or will I have to calibrate the dash, if your going for that last one I'll get mine from tweeks it's got an option for a shorter cable. Thanks Tony Tony, the Dash2 looks for a 0-5v input and you can scale the ouput (display) against the input v. the output v from the lambda controller is linear so it's easy enough to do. Spartan one looks good, doesn't seem to have a lot of the features of the Innovate but if all you need is a 0-5v output then ideal. If you want the Innovate help yourself. I've found the same at £160 elsewhere. According to Innovate you can shorten the lead if needed. Steve. 1 Link to comment Share on other sites More sharing options...
wizzer Posted April 15, 2020 Author Share Posted April 15, 2020 Thanks everyone now sorted. Tony Link to comment Share on other sites More sharing options...
Recommended Posts