Clearing a few Bits

[BenD]

@Paul T yep send me a pm mate

[BenD]

Been a long time but im still falling over some of these bits on the garage. open to offers

[Morris]

Do you have any silicone hose remaining? If so I'll check what I need this evening.

 

Morris.

[BenD]

2 hours ago, Morris said:

Do you have any silicone hose remaining? If so I'll check what I need this evening.

 

Morris.

I still have some of the hoses yes

[Morris]

1 minute ago, Ben(EBD-ENG) said:

I still have some of the hoses ye

Great, I'll let you know this evening.

[Morris]

I am looking for:

 

90 deg bends 32 mm (2 off)

180 deg bends 32 mm (2 off)

32 to 25 (1") reducer (2 off)

 

Morris.

[BenD]

On 15/03/2020 at 13:54, BenD said:

 

a pair of engine mount rubbers

these are brand new they were purchased from burtons i know they are taller than the standard ones i got them to raise my mx5 engine up but never used them

£10 Plus Postage

 

On 15/03/2020 at 09:46, BenD said:

Textile technologies supersil hose protection

https://www.textiletechnologies.co.uk/supersil-fire-sleeve-red.html

got this when i had my mx5 turbo to protect the water lines above the manifold, its glass reinforced inside ill be honest horrible stuff if you get the fibers on you

41mm internal diameter fits over a 32mm silicone hose i have 1200mm of this 

£15 plus Postage

 

same stuff but 16internal diameter i have 1600mm of this 

£10 Plus Post

 

same again but 12mm internal diameter 550mm Long

£5 Plus Post 

Bit if bump. Clearing the garage today. I still have the bits quoted in this post make me an offer

 

Also have this waterproof bag ideal for touring. Think I got it from Aldi a few years back. Free if you can collect it from Sedgley  otherwise I can post it but you'll have to cover the cost

[TAFKARM]

How tall are the engine mounts Ben?

[BenD]

13 minutes ago, Rush Motorsport said:

How tall are the engine mounts Ben?

52mm high 72mm diameter

[TAFKARM]

No good for me thanks anyway