BenD Posted March 15, 2020 Posted March 15, 2020 Textile technologies supersil hose protection https://www.textiletechnologies.co.uk/supersil-fire-sleeve-red.html got this when i had my mx5 turbo to protect the water lines above the manifold, its glass reinforced inside ill be honest horrible stuff if you get the fibers on you 41mm internal diameter fits over a 32mm silicone hose i have 1200mm of this £15 plus Postage same stuff but 16internal diameter i have 1600mm of this £10 Plus Post same again but 12mm internal diameter 550mm Long £5 Plus Post small selection of silicone hoses there are: Reducers: 16-22, 16-25, 19-25, 28-32, £2 Each plus Postage 51-63 2 off, 51-60 £3 each plus post 90degree Bends there are 8mm,16mm,16mm,32mm,51mm £3 each plus post Car Builder solutions Bonnet vent it has some form of glue stuck to it from storage £5 Plus Post open to offers on everything and i can combine postage for multiple items
TAFKARM Posted March 15, 2020 Posted March 15, 2020 Is it just the one 90 you have in 32mm? I need lots of 32mm stuff...
BenD Posted March 15, 2020 Author Posted March 15, 2020 5 minutes ago, RussH said: Is it just the one 90 you have in 32mm? Yep just the one mate
BenD Posted March 15, 2020 Author Posted March 15, 2020 few more bits Mx5 sump baffle i got this of Mark(Smokey Mow) £10 plus post chinesium 52mm gauge holder Free Just cover the postage 51mm OD Alluminum tube with beaded ends 600mm long has a few storage marks £5 Plus Post 2inch stainless mandrel 90degree bend has roughly 100mm of leg length either side £5 Plus Postage 2.5inch 400mm long stainless tube £7 Plus Post Stainless reducer 3inch down to 2.5inch but the tube slide inside £5 Plus Post
BenD Posted March 15, 2020 Author Posted March 15, 2020 Genuine Mx5 1.6 camcover Gasket £15 Plus Post Various Mx5 spares all of these bits are from a 1.6 long nose mk1 engine except for the oil pickup pipe which is from a 1.8 engine and the big long silver bolts with nuts are genuine mazda rear arm bolts that hold the bottom of the upright to the wishbone. if you see anything you want let me know the price are cheap as they will be retired to my scrap pile if not same goes for these bags of bolts. there are a set of clutch bolts, a set of sump bolts, a set of flywheel bolts, a few camcover bolts, and a set of 1.6 head bolts and a bag of random bolts i cant confirm if these bags are complete sets or not ive gone through that many engines i just dont know. same goes for these prices are cheap as otherwise destined for the scrappy just cover delivery or come and get them. a pair of engine mount rubbers these are brand new they were purchased from burtons i know they are taller than the standard ones i got them to raise my mx5 engine up but never used them £10 Plus Postage
BenD Posted April 19, 2020 Author Posted April 19, 2020 2 hours ago, Steve (sdh2903) said: What height are the engine mounts ben? 52mm high 72mm diameter
bigron Posted April 20, 2020 Posted April 20, 2020 Could I take a 90 degree 51mm hose if available please?
BenD Posted April 20, 2020 Author Posted April 20, 2020 @bigron yep still available mate send me a pm and we can get it sorted
Paul T Posted April 20, 2020 Posted April 20, 2020 Could I take a 16-22 reducer and 2 x 16mm 90Deg bends if you still have them?
Recommended Posts