Scotty72 Posted September 20, 2019 Author Share Posted September 20, 2019 No, but I've just borrowed some from the motor factors next door. Here's the result 40.81mm 1 Quote Link to comment Share on other sites More sharing options...
Rednop1 Posted September 20, 2019 Share Posted September 20, 2019 It's a 41mm socket 1 Quote Link to comment Share on other sites More sharing options...
Scotty72 Posted September 20, 2019 Author Share Posted September 20, 2019 Yeah I've ordered one. Only problem now is my torque wrench only goes upto 210nm.....Aaargggghhhhh! 1 Quote Link to comment Share on other sites More sharing options...
Scotty72 Posted September 22, 2019 Author Share Posted September 22, 2019 On 12/09/2019 at 18:48, Dave Eastwood (Gadgetman) - Club Secretary said: Don’t forget the front ones are adjustable to take up any small degree of play. (Not worn to the point of rumbling bearings or excess play, but if there’s only a little play, they may just have bedded in and need a tweek). Adjusted them this morning. Nearside needed tweaking by two divisions (when I removed the pin I could turn the nut with my fingers) and offside by one. 2 Quote Link to comment Share on other sites More sharing options...
Ian Kinder (Bagpuss) - Joint Peak District AO Posted September 22, 2019 Share Posted September 22, 2019 1 hour ago, Scotty72 said: Adjusted them this morning. Nearside needed tweaking by two divisions (when I removed the pin I could turn the nut with my fingers) and offside by one. Great, you can get back playing in it now! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.