Swirl pot

[Liz03]

Swirl pot required thanks Chris and liz 

[tim]

Hi

I will ask my son if there are any ready made where he works

what fitting do you need is it  dash or push on

rds tim

whats your  phone no please could ring if its easrier

[Liz03]

Bump 

[1960dave]

Why a Swirl pot? Why not a injection tank?

[Kingster]

A swirl pot helps with fuel starvation on corners with fuel injection. Makes a huge difference on track. 

[1960dave]

1 minute ago, Chris King - Webmaster and Joint North East AO said:

A swirl pot helps with fuel starvation on corners with fuel injection. Makes a huge difference on track. 

Depends if you have a pot inside the tank and a pump inside the tank as well.

[Kingster]

11 minutes ago, 1960dave said:

Depends if you have a pot inside the tank and a pump inside the tank as well.

Of course - but then you’d not need a swirl pot 

[TableLeg]

One here....

 

[Kingster]

56 minutes ago, TableLeg said:

One here....

 

No it’s sold if you read more...

[Liz03]

Let's not go there again it's why I had my rant about wanted adverts 

Any way let's move on 

I have a fuel filter audi a 3  with a 3 bar pressure reg built in with 3  8 mm pipe unions fuel in from the tank and out to the fuel rail on the bottom  and one return to the tank through the 3 bar pressure reg at the top maintaining 3 bar up to the fuel rail .

The thinking is any air from surge in the tank would bleed off back to the tank through the reg at the top of the filter also no return required from the rail  as a constant 3 bar is maintained from the filter.

What do you thinks 

[Kingster]

Here’s my set up

[Liz03]

Still looking