griffith500user Posted January 14, 2019 Posted January 14, 2019 I have both an HP fuel pump and filter to fit but don’t currently have any mounting brackets for them. Pump and filter are as follows:
Kit Car Electronics and Essex AO Posted January 15, 2019 Posted January 15, 2019 Large rubber lined P-clips work well for these, as a suggestion
Terryathome Posted January 15, 2019 Posted January 15, 2019 Can you not make your own? Between the red and black circle is rubber, give's it a bit of a cushion like. Use some 1mm alloy and wrap it round the pump with a couple of bends on it. Black bit is a bit of mild steel to spread the clamping force. Use 2 M6 through the chassis.
Recommended Posts