LukeW Posted January 1, 2019 Posted January 1, 2019 I’m after the metal sheeting that goes on top of the gearbox tunnel, it was riveted in place, I was hoping to drill out the holes and rivnut, but the holes are too close to the edge to reuse. So need a fresh piece to replace
neptune Posted January 1, 2019 Posted January 1, 2019 You will find plenty of small pieces aluminium on ebay that would do the job if you want to re make it yourself.
LukeW Posted January 1, 2019 Author Posted January 1, 2019 That’s what I was thinking of no ones got any lying about.
Recommended Posts