Weekend Warrior Posted May 21, 2018 Posted May 21, 2018 My car is factory built ,has a 2.0 zetec blacktop and is registered on a 62 plate . I want to order a crank sensor and a few other bits but there are so many variables ,how do I tell if it’s a focus ,mondo and it’s year . Quote
Dave Eastwood (Gadgetman) - Club Chairman Posted May 21, 2018 Posted May 21, 2018 A good starter for ten, is to post a request in Tech Talk, alongside some clear photos showing the front of the engine, the top cam cover arrangement and the sides of the engine. That way, someone will potentially recognise it from what they have, and tell you what it was from. 1 Quote
TableLeg Posted May 21, 2018 Posted May 21, 2018 Have a look at your engine block code and then see if you can xref the info here... http://www.toyne.org.uk/zetec-engine.html Hope that helps. 1 Quote
Dave Eastwood (Gadgetman) - Club Chairman Posted May 21, 2018 Posted May 21, 2018 That looks like an excellent resource! This thread may end up moving to the FAQ section of the info pans out! Quote
Thrustyjust Posted May 21, 2018 Posted May 21, 2018 I would have thought the 2 ltr blacktop has the same sensor on it through build life. Is there not a ford code on the side of it ? Quote
Weekend Warrior Posted May 21, 2018 Author Posted May 21, 2018 I’m ashamed to say I don’t know know where it is never mind what it looks like .When you go on eBay and enter ford zetec 2.0 blacktop crank sensor you get them for focuses ,mondeos ,tdci ,are they all the same then Quote
GaryD1971 Posted May 21, 2018 Posted May 21, 2018 My 1800 zetec crank sensor is on the passenger side of the engine low down towards the rear of the block where the block meets the gearbox bell housing. It's a small black plastic plug that comes out at an angle. Mine's a 2001 engine. 1 Quote
GaryD1971 Posted May 21, 2018 Posted May 21, 2018 3 minutes ago, GaryD1971 said: My 1800 zetec crank sensor is on the passenger side of the engine low down towards the rear of the block where the block meets the gearbox bell housing. It's a small black plastic plug that comes out at an angle. Mine's a 2001 engine. Quote
Weekend Warrior Posted May 21, 2018 Author Posted May 21, 2018 1 minute ago, GaryD1971 said: Cheers Gary I’ve checked and ca see mine can’t see any numbers on it though Quote
TableLeg Posted May 21, 2018 Posted May 21, 2018 Some more info you can look through. See if you can find the engine block number. https://workshop-manuals.com/ford/mondeo_1997_08.1996-09.2000/mechanical_repairs/3_powertrain/303_engine/303-01a_engine_vehicles_built_up_to_05-1998_1.6l-1.8l-2.0l/description_and_operation/engine/ Quote
TableLeg Posted May 21, 2018 Posted May 21, 2018 Plus if you remove the sensor you can always check it against these dimensions... https://motorsport-electronics.co.uk/product/crank-sensor-vr-zetec-fitment/ Quote
Dave-P-H Posted May 21, 2018 Posted May 21, 2018 You will need to remove it to see the number, this is mine from a silvertop zetec. Quote
Weekend Warrior Posted May 21, 2018 Author Posted May 21, 2018 Cheers Pete do you just grab it and pull (I don’t want to break it ) Quote
Weekend Warrior Posted May 21, 2018 Author Posted May 21, 2018 J Stamped into the side where it meets the bell housing just above this appear to be BP 09 12 does that mean anything Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.