TableLeg Posted April 30, 2018 Posted April 30, 2018 4x -12AN ORB (O Ring) to -12AN flare straight fittings Alloy NEW £10 9" Pair of NEW 9" 175lb 1.9" springs (Faulkner) £40 NEW
TableLeg Posted April 30, 2018 Author Posted April 30, 2018 2 minutes ago, mr_mcp said: Hi, what engine are the plugs for? Various cars Peugeot 206 Hatchback 1.4 i (1998 - ) 55kW Peugeot 206 Hatchback 1.1 i (1998 - ) 44kW Citroën Saxo Hatchback 1.1 X,SX (1996 - 2004) 44kW Peugeot 106 Mk II 1.1 i (1996 - ) 44kW BMW Z3 Convertible 1.9 (1995 - 2003) 103kW BMW 5 Series Saloon 523 i (1995 - 2003) 125kW Peugeot 106 Hatchback 1.1 (1991 - 1996) 44kW Porsche Boxster Convertible 2.5 (1996 - 2004) 150kW BMW 5 Series Saloon 528 i (1995 - 2003) 142kW Citroën Xsara Hatchback 1.4 i (1997 - 2005) 55kW But the specs of the plug are as follows: Technical Information: General: Type: Resistor type Thread Size: 14mm (9/16") Hex Size: 16mm (5/8") Reach: 19mm (3/4") Gap: 0.9mm (0.04") Thread Pitch: 1.25mm (1/16") Height Standard: ISO Centre Electrode: Type: Standard Material: Nickel Size: 2.5mm (1/8") Projection: Extended Projection Ground Electrode: Type: Standard Material: Nickel Electrode Count: 2
mr_mcp Posted April 30, 2018 Posted April 30, 2018 4 minutes ago, TableLeg said: Various cars Peugeot 206 Hatchback 1.4 i (1998 - ) 55kW Peugeot 206 Hatchback 1.1 i (1998 - ) 44kW Citroën Saxo Hatchback 1.1 X,SX (1996 - 2004) 44kW Peugeot 106 Mk II 1.1 i (1996 - ) 44kW BMW Z3 Convertible 1.9 (1995 - 2003) 103kW BMW 5 Series Saloon 523 i (1995 - 2003) 125kW Peugeot 106 Hatchback 1.1 (1991 - 1996) 44kW Porsche Boxster Convertible 2.5 (1996 - 2004) 150kW BMW 5 Series Saloon 528 i (1995 - 2003) 142kW Citroën Xsara Hatchback 1.4 i (1997 - 2005) 55kW But the specs of the plug are as follows: Technical Information: General: Type: Resistor type Thread Size: 14mm (9/16") Hex Size: 16mm (5/8") Reach: 19mm (3/4") Gap: 0.9mm (0.04") Thread Pitch: 1.25mm (1/16") Height Standard: ISO Centre Electrode: Type: Standard Material: Nickel Size: 2.5mm (1/8") Projection: Extended Projection Ground Electrode: Type: Standard Material: Nickel Electrode Count: 2 Ah ok, no good for me unfortunately. Thanks for the quick response!
GaryD1971 Posted April 30, 2018 Posted April 30, 2018 I'd like the push button starter kit please. Can I collect from Stoneleigh on the Sunday? Many thanks, Gary.
TableLeg Posted May 1, 2018 Author Posted May 1, 2018 10 minutes ago, Zetec1.6 said: Hi, i’ll take The hub nut covers please. Thanks You have PM.
Kevin Pullen Posted May 2, 2018 Posted May 2, 2018 I’ll take the spare wheel carrier please will be at Stoneleigh first thing Monday or whereabouts in Suffolk are you
Onliest Smeg David Posted May 2, 2018 Posted May 2, 2018 1 hour ago, banshee said: I’ll take the spare wheel carrier please will be at Stoneleigh first thing Monday or whereabouts in Suffolk are you You will also require the support bar, that bonds behind the rear panel, to which the spare wheel is bolted. Without this the wheel carrier is unlikely to take the weight. 1
Dave Eastwood (Gadgetman) - Club Chairman Posted May 2, 2018 Posted May 2, 2018 Absolutely, what Dave said.
Kevin Pullen Posted May 2, 2018 Posted May 2, 2018 One on mine is very scabby it will be a replacement&
TableLeg Posted May 2, 2018 Author Posted May 2, 2018 4 hours ago, banshee said: I’ll take the spare wheel carrier please will be at Stoneleigh first thing Monday or whereabouts in Suffolk are you You have pm.
Recommended Posts