Windscreen wiper kit. SOLD

[Dave Eastwood (Gadgetman) - Club Chairman]

I bought this wiper set up second hand a number of years ago, when I first took the aero screen off my old car.

It includes,, motor, (with park switch), mounting bracket, drive and tubes, a pair of wheel boxes, including the Westfield angled spacers, note these need trimming, normally, to suit the car they’re going on. And the wiper arms with top hat retainers. The blades are shot, but can easily be replaced with Halfords universal fit blades.

In fact, everything included is  shown below.

(Well, except for the table and old towel!)

£50 plus postage.

I replaced this while I had the scuttle stripped down recently, as there is a little bit of wear, on either the drive spring, or the wheel boxes. It’s not really a problem, the wipers just stick a little short of fully parked sometimes. On a dry use car that needed wipers to pass an mot, (which these have done with no comments), you’d never notice. Even on a car that only caught the occasional shower, you’d rarely spot it. You have to be daft like me, and go out in heavy rain and snow before it becomes “a thing”! 

[GaryD1971]

If you don't happen to have a lot of interest Dave, would you be willing to split, as I need a pair of the wheel spindles with the nylon spacers and wiper arms. I already have the motor and cable/tube assembly. 

[Dave Eastwood (Gadgetman) - Club Chairman]

Yeah, ask me again, next Sunday. If there’s been no interest, we’ll sort something out.

(I’ll be moving in the hopefully not too distant future, and I’m not dragging lots of spares with me!)

[GaryD1971]

Thanks Dave. 

[neptune]

Dave i would be interested in the the wiper motor. Mine doesn't self park .

[Dave Eastwood (Gadgetman) - Club Chairman]

Neptune, it would be remiss of me to not point out that the auto park bit is typically a switch that plugs into the side of the wiper motors. They’re not that expensive either, check whether your motor will take one?

[Mauro]

Hi Dave,

Are the gears 110 deg ?

[Dave Eastwood (Gadgetman) - Club Chairman]

They’re whatever standard Westfield fitment is, I’ve never measured! I’ll have to see if I can work it out on the bench.

[David tucker]

If you end up splitting these i would like the arms many thanks 

[Mauro]

Pm sent

[Mauro]

Hi Dave, any feedback ?

[Dave Eastwood (Gadgetman) - Club Chairman]

Sorry, not had any time this week to check for shipping costs etc. I’ll have to package them up and weigh them. I should be able to do it this afternoon, then I can give you a carriage price.

[Mauro]

No problem Dave, I'm not in hurry... I wrote you again just to check,

Cheers,

Mauro

[Dave Eastwood (Gadgetman) - Club Chairman]

Sold to Mauro, pending payment