MT75 gearstick

[Liz03]

Wanted a gearstick for a mt75 gearbox

[Trevor Little (Trevturtle)]

 

I assume you just mean the gear stick that pushs onto the frame and gear stick stub  on the gearbox ... not the  whole  frame plus the gear stick

I have both .. I bought the gear stick  off ebay  to make  a new gear lever  but never used it.  Ì will find it today  and post  a picture.

 

 

[Trevor Little (Trevturtle)]

Here go.. I only used section on the right.  Welded a steel shaft on top to fit a gear lever. 

The gear lever is off a Sierra.. you can use the whole thing..  but it will be too long.   

[Liz03]

Thanks for the reply sorry for late response 

we have the same part as in the photo and wondered if there was a shorter stick still with the reverse gate part or do you have to just make one without the gate pin.

thanks Liz and chris

[Trevor Little (Trevturtle)]

Hi, 

If you want to keep the gate pin you need to use all of the sierra gear stick....but you end up with a comedy gear stick...much too long.

I looked for a shorter gate pin gear stick and looked into how to make one.  It's  not possible if you want to have a gear stick that's not too long.

If you weld a steel shaft to you gear stick it need to be bent backwards to avoid the dash.