Bonnet, scuttle, nose, fillet and carbon dash. - SOLD

[Tim Reid]

Genuine Westfield "kit type" bodywork from a wide body car.

1x Scuttle with heater vent bonded into place. £285 (scuttle) and £50 (ducting) new but no longer available as replaced by zk and fw versions which are without the nice curve at the edge of the dash

1x carbon fiber (real) dashboard (without switches and dials unless suitable offer negotiated). £140 new.

1x Windscreen fillet (not pictured) £58 new.

1x nose. With rivnuts to mount a numberplate and/or front diffuser but can be drilled out and filled it covered with the stickback which is included. £300 new.

1x bonnet which is newer than the others so slightly different colour but hardly noticeable unless in certain light levels. £350 new.

2x cycle wings to suit 205 tyres. £266 new.

Cost £1,500 new Looking for around £425.

Carbon fibre Aeroscreen available at additional cost if required. £120 including fittings and interior carbon fibre blanking section to fill the gap on top of the scuttle.

Good condition but we'll used, few holes as you would expect of bodywork that has done about 20,000 miles and seen a few changes over the years. Good for a track car or could be filled, sanded and polished up (thick gellcoat) for pretty car. Only selling as need extra hight bonnet  and freshening things up. You are welcome to inspect.

Holes in the scuttle for windscreen and heater which have colour matched stickback wrap stuff. I have plenty of spare so they can be refreshed but have not been an issue with washing off over the past couple of years. Mounting points for half doors to fit them with turn fasteners so they are removable.

The holes for the aeroscreen should be covered when a windscreen is fitted. 

Let me know if you have any questions.

[Tim Reid]

[Jonsey]

Would you sell nose cone? if so price please .

[Tim Reid]

Currently looking to sell as a set. I'm going to finish removing them and put them on eBay if no one on here wants them.

You could sell on the bits you don't want or keep them as spares.

[Jonsey]

Ok cheers .

 

[neptune]

Hi Tim,

Has the bonnet got any holes cut in the nearside? Pics don't show clearly

Thanks 

[Tim Reid]

13 hours ago, neptune said:

Has the bonnet got any holes cut in the nearside? 

No holes in the bonnet :-)

[Andrew (Fat_chap)]

Is everything still available? Will PM you

Thanks, Andrew

[Tim Reid]

Yes all still for sale. I will reply to your pm.

[Tim Reid]

SOLD