congorobot Posted June 9, 2017 Posted June 9, 2017 Having an aero screen and being to big (read wide) for half doors in an SE, I find in the wet the car starts to fill up with water even with holes drilled. After opening the holes up I found surface water was coming in from underneath. I am not sure if there is an off the shelf solution for this but to justify my 3d printer purchase I came up with this. I am going to try firstly to bond it with PU and if they come off then PU and 4 small rivets. 5 Quote
Onliest Smeg David Posted June 9, 2017 Posted June 9, 2017 Excellent - should work as the rake will result in lower pressure underneath Westfield, sucking water out 1 Quote
Dave Eastwood (Gadgetman) - Club Chairman Posted June 9, 2017 Posted June 9, 2017 Brilliant, even if it does look like a mini loo! Just remember to fix them on the right way round! 1 Quote
congorobot Posted June 9, 2017 Author Posted June 9, 2017 1 hour ago, Dave Eastwood (Gadgetman) - Club Secretary said: Brilliant, even if it does look like a mini loo! Just remember to fix them on the right way round! It could have a pivot for for bidet action Quote
pistonbroke Posted June 11, 2017 Posted June 11, 2017 They use the same idea n boats to drain the anchor locker which is always open to atmosphere . Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.