Chris Hooper Posted May 5, 2017 Share Posted May 5, 2017 Hi I need a front indicator pod. I bought pair ( eBay) ages ago and and now I come to use one the PO cut the mounting bolt off with a hack saw so I can't put a nut on there is no space or thread. Long story short I need one pod or a different plan. It will need to be IVAd. Link to comment Share on other sites More sharing options...
GaryD1971 Posted May 6, 2017 Share Posted May 6, 2017 Hi Chris. Can you not drill out the remaining thread and retap the hole? Then fix in place with a bolt to fit the threaded hole. Link to comment Share on other sites More sharing options...
Chris Hooper Posted May 6, 2017 Author Share Posted May 6, 2017 I'm going to have to do that by the look of it. It's just a bit of a faf. 1 Link to comment Share on other sites More sharing options...
fildyke Posted May 16, 2017 Share Posted May 16, 2017 Hi Chris Did you manage to fix or replace your pod. If not and you still have it lying around I'm need one to test fit some leds so just after any old pod rather than cut up my existing. Cheers Phil Link to comment Share on other sites More sharing options...
Chris Hooper Posted May 16, 2017 Author Share Posted May 16, 2017 Sorry put on the back burner. I need to get back to it. If I muller it completely I'll give you a shout Link to comment Share on other sites More sharing options...
fildyke Posted May 17, 2017 Share Posted May 17, 2017 Ok Link to comment Share on other sites More sharing options...
Recommended Posts