binjoau Posted May 2, 2017 Posted May 2, 2017 Hey all, didnt get chance to get these to Stoneleigh so I am prepared to ship. I have a pair of front lower wishbones in good condition, these are a form of widetrack (about 1.5" longer than standard) and have the Westfield logo on them. They are round tubular and are not the regular widetrack flat items. *(Assumed Sierra SDV as per comments below)* I also have a pair of standard upper wishbones in ok condition. I need these gone as they are gathering dust. £85 shipped for the lowers £45 shipped for the uppers thanks Alex
Kingster Posted May 2, 2017 Posted May 2, 2017 If the lowers are in between standard and wide, they are almost certainly Sierra SDV.
binjoau Posted May 2, 2017 Author Posted May 2, 2017 3 minutes ago, Chris King - Webmaster and Joint North East AO said: If the lowers are in between standard and wide, they are almost certainly Sierra SDV. Thanks Chris, I originally purchased them from another member as standard wishbones but found after a lot of wasted time this wasn't the case!
Kingster Posted May 2, 2017 Posted May 2, 2017 It's an easy mistake to make as they look standard track unless you measure and also, as we know, there are so many variations on a theme with our cars that when you buy a used one, you may assume it has "standard" parts! 1
binjoau Posted May 6, 2017 Author Posted May 6, 2017 Pictures now added, also have a standard lower wishbones in white for sale too.
Arm Posted May 9, 2017 Posted May 9, 2017 Hi Thanks for PM. Not sure if these are Sierra or if that makes any difference. Could you please measure the outer distance between the pickup points ie where it goes into the chassis and the distance to the ball joint holes (short distance ie square to the pickup points) ? Thanks 1
binjoau Posted May 14, 2017 Author Posted May 14, 2017 On 09/05/2017 at 21:45, Arm said: Hi Thanks for PM. Not sure if these are Sierra or if that makes any difference. Could you please measure the outer distance between the pickup points ie where it goes into the chassis and the distance to the ball joint holes (short distance ie square to the pickup points) ? Thanks Sorry for the delay I didn't see this reply! I will measure them later this morning and send the details thanks
Recommended Posts