Steve (sdh2903) Posted January 14, 2017 Posted January 14, 2017 Just wondered if anyone had an offcut of 57mm fuel filler hose going spare? Only need a wee bit as it's an FW body/tank. Cheers Steve.
Thrustyjust Posted January 14, 2017 Posted January 14, 2017 Cant remember what I had left, I'll see if I can find it tomorrow.
Thrustyjust Posted January 14, 2017 Posted January 14, 2017 Sorry mate, just turfed the tat out and nothing left. Must have chucked it.
Steve (sdh2903) Posted January 14, 2017 Author Posted January 14, 2017 No worries. Cheers for looking.
Andy (Sycho) Posted January 14, 2017 Posted January 14, 2017 Got a bit not sure it's enough! how much?
Steve (sdh2903) Posted January 14, 2017 Author Posted January 14, 2017 Not actually sure on the exact length until I get the body lifted on the car early next week. Not very helpful I know!!
Andy (Sycho) Posted January 14, 2017 Posted January 14, 2017 Properly not enough then as it's less than I used!
Tom Frankland (T3OMF) Posted January 15, 2017 Posted January 15, 2017 I'll have a look when I get up, I have all my spare hoses hung up in the garage
Thrustyjust Posted January 15, 2017 Posted January 15, 2017 1 hour ago, Tom (T3OMF) - Cotswolds AO said: I'll have a look when I get up, I have all my spare hoses hung up in the garage You can measure the length required as you dont have bodywork on as well to confirm
Tom Frankland (T3OMF) Posted January 15, 2017 Posted January 15, 2017 Sorry I haven't got any left that I can find But I have measured the length of mine (ooooh er mrs ) and you need at least 57mm
Thrustyjust Posted January 15, 2017 Posted January 15, 2017 I 'think' the factory give you 100mm , so the off cuts maybe too short anyway.
Steve (sdh2903) Posted January 15, 2017 Author Posted January 15, 2017 Cheers Tom for the measurement. I'll stop being a tight wad and order some up. I see burtons and rally design sell it by the cm. 1
Recommended Posts