Sparkymart Posted January 14, 2017 Share Posted January 14, 2017 Anyone got the above thermostat housing the type with the threaded holes to take the screw in temp sender. The one on the left. Needed to get the car back on the road until I can sort out a raceline water rail Thanks Link to comment Share on other sites More sharing options...
Beggers Posted January 17, 2017 Share Posted January 17, 2017 Its a Mondeo one that your looking for if that helps search on the internet or ebay etc. I had this issue and managed to get one from a scrap yard 2.0 Mondeo blacktop that fitted onto my new focus 2.0 after some cleaning. Link to comment Share on other sites More sharing options...
Sparkymart Posted January 17, 2017 Author Share Posted January 17, 2017 10 hours ago, Beggers said: Its a Mondeo one that your looking for if that helps search on the internet or ebay etc. I had this issue and managed to get one from a scrap yard 2.0 Mondeo blacktop that fitted onto my new focus 2.0 after some cleaning. Cheers do you know what year? I've looked in every scrap yard near me and even the ones on ebay don't seem to have the threaded holes I'm getting desperate now the date stamp on mine is 1999 but all the focus and mondeo of that year have been different Link to comment Share on other sites More sharing options...
Beggers Posted January 22, 2017 Share Posted January 22, 2017 Mine came from a 2000 w reg Ghia estate. engine code is NGD which was last of blacktops like an in life revision to them I understand. Link to comment Share on other sites More sharing options...
Beggers Posted January 22, 2017 Share Posted January 22, 2017 Silvertop housing should fit I was told also. Link to comment Share on other sites More sharing options...
Sparkymart Posted January 23, 2017 Author Share Posted January 23, 2017 Thank beggers I've found loads that will fit and has all the right ports but it's just the threaded hole for the temp sender I can't find Link to comment Share on other sites More sharing options...
JulianE Posted January 30, 2017 Share Posted January 30, 2017 I've got a complete push in housing with the sender still fitted to it if of any use , I assume the only difference is the sender ? , send you a photo tonight if it helps . Link to comment Share on other sites More sharing options...
DamperMan Posted January 30, 2017 Share Posted January 30, 2017 I transferred my housing off my old Zetec. This had both upper and lower screw in sensors. My NEW "2005" crate engine came with a housing with un-drilled holes. Breathly i considered drilling them out.. The old Zetec had 98 date stamp and was from a Mondeo if that helps. The part should have a part number on it and maybe google will be your friend. You may want also to get a new seal, a detail I also found was the square section seal to mount it was also different between early and late. The early one was a bigger diameter compared to the new one. Lucky my old seal was in really good condition to transfer it over. Link to comment Share on other sites More sharing options...
Beggers Posted January 31, 2017 Share Posted January 31, 2017 On 1/23/2017 at 08:17, Sparkymart said: Thank beggers I've found loads that will fit and has all the right ports but it's just the threaded hole for the temp sender I can't find A smiths 1/8NPT sender fits in the hole where the blue sensor is on your picture. http://www.demon-tweeks.co.uk/motorsport/gauge-sender-units/smiths-water-temperature-sender-for-telemetrix-and-international-gauges Link to comment Share on other sites More sharing options...
Sparkymart Posted January 31, 2017 Author Share Posted January 31, 2017 On 30/01/2017 at 10:14, DamperMan said: I transferred my housing off my old Zetec. This had both upper and lower screw in sensors. My NEW "2005" crate engine came with a housing with un-drilled holes. Breathly i considered drilling them out.. The old Zetec had 98 date stamp and was from a Mondeo if that helps. The part should have a part number on it and maybe google will be your friend. You may want also to get a new seal, a detail I also found was the square section seal to mount it was also different between early and late. The early one was a bigger diameter compared to the new one. Lucky my old seal was in really good condition to transfer it over. That's the same date stamp as mine the only one I can find on Google is over £100 so I might as well get a water rail and be done with it Link to comment Share on other sites More sharing options...
DamperMan Posted January 31, 2017 Share Posted January 31, 2017 Escort mk5 mk6 zetec thermostat housing rare! O28M-9k478-AF N84U4A NO CRACKS Maybe worth asking if it's got the sensors as you want them. Link to comment Share on other sites More sharing options...
Sparkymart Posted February 1, 2017 Author Share Posted February 1, 2017 20 hours ago, DamperMan said: Escort mk5 mk6 zetec thermostat housing rare! O28M-9k478-AF N84U4A NO CRACKS Maybe worth asking if it's got the sensors as you want them. Thanks Tony it's now ordered Link to comment Share on other sites More sharing options...
Recommended Posts