Paul Hurdsfield - Joint Manchester AO Posted July 4, 2003 Posted July 4, 2003 Std steering Rack, done 9,000 miles on my westy £25.00 Std Nose Cone (non ducted) in need of some tlc, yellow but needs tickling up and painting (trackday scars) can be bolted straight on, I used it in this condition for almost a year. off a 1999 SEIW, mould ZK007, laminator GH, Production code 13DJ, pigment SB JC583. £25.00 SOLD All the following off a brand new 1996 2.0ltr Zetec engine (mondeo) Sump £10.00 SOLD Water Pump £10.00 Inlet manifold complete with all injectors £20.00 SOLD Exhaust Manifold £10.00 SOLD 1996 Citroen ZX, new genuine Citroen parts. 2 set of front brake pads £5.00 each SOLD Handbrake cable £5.00 all parts ono tel 0771 503 6769
ACW Posted July 4, 2003 Posted July 4, 2003 WRT to the nose. Need to know what type of bodywork you have. does your dash go to the edge of the scuttle or do you have a rounded moulding on the edge of the scuttle ? Thanks, ACW.
Paul Hurdsfield - Joint Manchester AO Posted July 4, 2003 Author Posted July 4, 2003 Hyah Adrian the dash goes to the edge of the scuttle, if you check the mould number on your existing nose it should confirm whether the two will match, i can e mail some pics if you wish Paul
jeff oakley Posted July 6, 2003 Posted July 6, 2003 Hi paul if the rack is still available I will have it jeff
Paul Hurdsfield - Joint Manchester AO Posted July 7, 2003 Author Posted July 7, 2003 Rack is yours Jeff you have pm
Recommended Posts