brian snelling Posted June 19, 2003 Posted June 19, 2003 2.1 pinto based on inj engine,grp1 valves,ported,block skimmed,rl30 cam,adj pulley,lightened flywheel with clutch,approx 10.5:1 comp,winged sump,approx 2500 miles since built.produced 169bhp and 149ftlb torque on rr.700 pounds n/a cosworth based on inj pinto 205 block and rods,was rebored with new pistons with cutouts,lightened flywheel with clutch,winged sump.head ported bigger i/l and ex ports with three angle seats,cams reground by newman cams,solid cam followers, higher lift springs,comp cam belt approx 10:1 comp.sold with i/l manifold and modified bosch distributor.no idea of output but can be tried as still in tiger cat,only done about 1500 miles.1500 pounds 1 unused 40 dcoe 120 pounds 1 lynx crossover i/l manifold for pinto 30 pounds pair of black flared front wings with brackets 40 pounds tele 02083612215 brian snelling
Recommended Posts