Steering column spline.

[brisca33]

Hi, i have just bought a 2003 registered SEW with ignition/steering lock just under the dash. The steering wheel is too much of a stretch for me so i was going to fit a spacer but they all seem to be 70/74 mm pcd six hole , my original looking Westfield badged hub and spacer are 4" 102mm pcd (old school) so could anyone tell me what the steering column spline is so i can get a new 70/74 mm hub and space that. The column is tapped for a center bolt as apposed to threaded for a nut.

 

Thanks in advance for any information Tommy.

[Andy (Sycho)]

You need to count the splines, they are usually 48 spline allegro columns. If it is Land Rover defender ones fit.

Andy

[SootySport]

This thread may help http://forum.wscc.co.uk/forum/index.php/topic/99230-what-steering-column-is-this/

[Ali and Gail]

Hi Tommy, just changed mine as well this is what you need, I also so went quick release which brought it forward 50mm and is far comfier and easier to get in and out off plus adds great security. I went for the Brown and Geeson quick release as they are UK made and been around for ages, be aware cheap Chinese stuff on the web.

 

I got the boss from Demon Tweeks eBay store

 

http://www.ebay.co.uk/itm/311445479482?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

I managed to get this in the end for £89 on line

 

http://b-gdirect.com/B-G%20Racing-steering-wheel-quick-release-system?search=quick%20release

 

Good luck

 

Alistair