Duratec Conversion Parts Wanted (Exhaust, Computer and Alternator)

[Adrian Davey (Aidey200) - South Wales AO]

Guys,

 

I'm converting from Pinto to Fiesta ST 150 Duratec.(I4)

 

I have the basics ... Low mileage Duratec Engine, Type 9 to Duratec Bellhousing, steel lightened flywheel, HD clutch, raceline sump (on its way)  and westfield engine mounts.

 

I need ....

 

1) Full / Part Exhaust system

2) Alternator with fixings for (Off SIDE / UK Passenger Side)

3) Omex or similar computer with / without loom ?

4) Anything I don't know I need yet

 

Cheers

Aidey

[Valentinik]

I've got an original duratec alternator if that's what you're after?

[Hornet600]

1.Space is tight at nearside between chassis rail and engine. You would be best to get the Raceline filter housing adapter. 2. Have you decided what side you want the alternator mounted? once you do you will need to buy the idle pulley. If you are going nearside, I have all the part numbers I used. 3. You will need an EGR blanking plate for the rear of the cylinder head. You will have problems with head room if you have a normal bonnet. I cut the top of the oil filler cap to give me 5 mm clearance it was that tight. 4. Hydraulic or cable clutch? let me know and ill tell you what you will need if cable. 5. I have a smallish alternator that I bought for £25 (I can send a pic if you want and its weight)

 

Cheers

[Adrian Davey (Aidey200) - South Wales AO]

Hi Hornet600

I will fit engine with new lightened flywheel, clutch, spiggot etc hopefully by next weekend.
I did do a trial fit to the new cable bell housing with no flywheel ...
And i have about a 1 cm clearance under the bonnet.. mine has the v8 ? Scoop ...

1) ok ive taken the original filter housing off anyway so another raceline order will be next .... thats where the sump is coming from...its arriving next week...(Update it will be next week now .....but at least the oil housing will be with it)

2) i was thinking (Off SIDE / UK Passenger Side) away from heat of exhaust.

3) got one for massive £4

4) cable clutch but i think i have all the parts now ...



Many thanks for your reply

[Adrian Davey (Aidey200) - South Wales AO]

I'm still looking for Duratec parts          

 

1) Full / Part Exhaust system

2) Alternator with fixings for (Off SIDE / UK Passenger Side)

3) Omex or similar computer with / without loom ?

  

[Cleggy the Spyder Man]

Hi there

 

I have just had a new complete simpson exhaust fitted so have a full duratec I4 system for sale

 

I have....

 

Westfield side exit manifold

 

Westfield 6" upgrade silncer (not long re-packed) - comes with the rear bracket and pipe clip - does make a bit of a rattle which I believe is the perforated tube inside needs fitting better - rattled from new (you will find a topic on this somewhere)

 

I also must have somewhere the original 5 3/4" can with cat that came with the car - you can have it with the sale if you want it (will help if you get an awkward MOT tester)

 

All items secondhand - have gravel peppering on the front edges - and could do with a polish up to make them look great - you know the score

 

Make me an offer if you are interested

 

Where are you?

[Adrian Davey (Aidey200) - South Wales AO]

Pm sent

[Cleggy the Spyder Man]

PM replied

[Adrian Davey (Aidey200) - South Wales AO]

PM Replied