S7EVE_MAC Posted June 11, 2016 Share Posted June 11, 2016 Does anyone have a couple of engine mount rubbers to hand before I go to WF. Thanks Steve. Link to comment Share on other sites More sharing options...
Nic Chase (NICO) - Shropshire & Mid-Wales AO Posted June 11, 2016 Share Posted June 11, 2016 On my Duratec I used the Land Rover V8. Bit stiffer than the originals and readily available on the bay. Link to comment Share on other sites More sharing options...
S7EVE_MAC Posted June 11, 2016 Author Share Posted June 11, 2016 Thanks Nic. I did wonder if I could use those. Thank-you. Steve. Link to comment Share on other sites More sharing options...
Andrew Posted June 11, 2016 Share Posted June 11, 2016 I got a pair from Rally Design recently. 1 Link to comment Share on other sites More sharing options...
Greenstreak-Andy D Posted June 11, 2016 Share Posted June 11, 2016 The Land Rover V8 mounts are about 5mm thicker to std, on my Duratec the oil cap just touches the bonnet with the v8 mounts Link to comment Share on other sites More sharing options...
DamperMan Posted June 11, 2016 Share Posted June 11, 2016 Reliant scimitar ones look similar ... Maybe worth an email to Graham Walkers to ask the thickness. Link to comment Share on other sites More sharing options...
JulianE Posted June 13, 2016 Share Posted June 13, 2016 Got a pair of new ones 45mm measurement uncompressed Link to comment Share on other sites More sharing options...
Recommended Posts