John Loudon - Sponsorship Liaison Posted March 12, 2003 Posted March 12, 2003 2 x near new AVO adjustable rose jointed shocks for rear of live axle car.Still boxed - £65 pair 2 x 11" 100 lb rear springs - £20 pair 2 x lightened steel cortina hubs - £25 pair 1 x 0-10,000 Lucas rev counter (80mm) Black rim and face - £45 1 x SW 0-100deg C electric water temp gauge (52mm) and sender. Black rim and face - £20 1 x SW 0-100psi electric oil pressure gauge (52mm) and sender. Black rim and face - £20 1 x 3.89:1 English diff - £25 2 x Sierra rear clipers for disk conversion on live axle - £20 1 x AP Racing clutch to suit X/Flow to Type 9 gearbox. Uprated cover and plate. Also release bearing. Light useage only. Still boxed - £100 1 x X/Flow thermostat housing with filler cap - £10 1 x Water header tank (as per factory - feed + return) - £10 1 x Water header tank (single outlet). Near new - £10 ! x X/Flow bottom hose (near new) - £8 1 x set good HT leads for X/Flow - £10 1 x new mechanical fuel pump for X/Flow - £10 1 x set carb misab washers for twin 40's - £4 1 x new set NGK spark plugs for X/Flow - £4 1 x X/Flow engine to bell housing dust shield - £5 Open to sensible offers on everything Various other odds and sods that I cant recall at moment - email with wish list and I'll check. Regards, John 02476 511518 / 07971 576848
dbinder Posted March 13, 2003 Posted March 13, 2003 John, Following our phone call I will have the other two guages as weel as the tacho. I will send extra with the cheque for Tacho. Thanks Dave.
John Loudon - Sponsorship Liaison Posted March 14, 2003 Author Posted March 14, 2003 Hi Folks, Tacho, gauges, HT leads and factory style header tank provisionally sold. All other stuff still gathering dust JL
John Loudon - Sponsorship Liaison Posted March 15, 2003 Author Posted March 15, 2003 Stu, Yes I am Just been too busy to collect Will do though so just ring me if yout want paying / it getting out of your way. Paulleo 72, Yes, I think they will so call if interested. BTW - what a lovely looking Pre Lit JL
Paul Ash Posted March 15, 2003 Posted March 15, 2003 Yes to the engine - g/box backplate. I'll contact you to arrange collection.
Recommended Posts